NL128102BC29_01 NEC, NL128102BC29_01 Datasheet - Page 23
![no-image](/images/manufacturer_photos/0/4/470/nec_sml.jpg)
NL128102BC29_01
Manufacturer Part Number
NL128102BC29_01
Description
TFT COLOR LCD MODULE
Manufacturer
NEC
Datasheet
1.NL128102BC29_01.pdf
(27 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
NL128102BC29_01NL128102BC29-01B
Manufacturer:
NEC
Quantity:
1 000
Company:
Part Number:
NL128102BC29_01NL128102BC29-01E
Manufacturer:
SHARP
Quantity:
1 000
6. PRECAUTIONS
6.1 MEANING OF CAUTION SIGNS
6.2 CAUTIONS
6.3 ATTENTIONS
6.3.1 Handling of the product
"6.3 ATTENTIONS", after understanding this contents!
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS" and
① Take hold of both ends without touch the circuit board cover when customer pulls out products
② Do not hook cables nor pull connection cables such as lamp cable and so on, for fear of damage.
③ If customer puts down the product temporarily, the product puts on flat subsoil as a display side
④ Take the measures of electrostatic discharge such as earth band, ionic shower and so on, when
⑤ The torque for mounting screws must never exceed 0.67N⋅m. Higher torque values might result in
⑥ The product must be installed using mounting holes without undue stress such as bends or twist
(LCD modules) from inner packing box. If customer touches it, products may be broken down or
out of adjustment, because of stress to mounting parts.
turns down.
customer deals with the product, because products may be damaged by electrostatic.
distortion of the bezel. And the screw length must be 4.0mm to 7.0mm.
(See outline drawings). And do not add undue stress to any portion (such as bezel flat area) except
mounting hole portion.
Bends or twist described above and undue stress to any portion except mounting hole portion may
cause display un-uniformity.
!
∗ Do not touch the working backlight. Customer will be in danger of burn injury.
∗ Do not shock and press the LCD panel and the backlight! There is a danger of breaking,
∗ Do not touch the working backlight. Customer will be in danger of an electric shock.
because they are made of glass. (Shock: To be not greater 490m/s
11ms, Pressure: To be not greater 19.6 N)
wrong operations.
wrong operations.
sustain a damage, if customer has wrong operations.
This sign has the meaning that customer will be injured by himself, if customer has
This sign has the meaning that customer will get an electrical shock, if customer has
This sign has the meaning that customer will be injured by himself or the product will
!
PRELIMINARY DATA SHEET DOD-PD-0410 (2nd edition)
2
NL128102BC29-01
and to be not greater
23