MBM29SL800BE Fujitsu Media Devices, MBM29SL800BE Datasheet - Page 9

• Manufacturer Part Number: MBM29SL800BE
• Description: (MBM29SL800TE/BE) FLASH MEMORY CMOS 8 M (1 M X 8/512 K X 16) BIT
• Manufacturer: Fujitsu Media Devices

(Continued)
*1 : The command combinations not described in “MBM29SL800TE/BE Standard Command Definitions” are illegal.
*2 : Both Reset commands are functionally equivalent, resetting the device to the read mode.
*3 : The Erase Suspend and Erase Resume command are valid only during a sector erase operation.
*4 : The Set to Fast Mode command is required prior to the Fast Programming command.
*5 : The Reset from Fast Mode command is required to return to the read mode when the device is in Fast mode.
*6 : Set sector address (SA) with (A
*7: This command is valid while RESET =V
*8 : The data “F0h” is also acceptable.
Notes :
Address bits A
Bus operations are defined in “MBM29SL800TE/BE User Bus Operations (BYTE
RA
SPA
RD
The system should generate the following address patterns :
SD
Sector Address (SA)
“MBM29SL800TE/BE User Bus Operations (BYTE
PA
SA
PD
Word Mode : 555h or 2AAh to addresses A
Byte Mode : AAAh or 555h to addresses A
Address of the memory location to be read
Address of the memory location to be programmed
Addresses are latched on the falling edge of the WE pulse.
Address of the sector to be erased. The combination of A
uniquely select any sector.
Sector address to be protected. Set sector address (SA) and (A
Data read from location RA during read operation.
Data to be programmed at location PA. Data is latched on the rising edge of WE.
Sector protection verify data. Output 01h at protected sector address and output 00h at
unprotected sector address.
18
to A
11
X
6
, A
“H” or “L” for all address commands except for Program Address (PA) and
1
, A
0
ID
) = (0, 1, 0).
.
10
10
to A
to A
MBM29SL800TE/BE
0
V
0
and A-
IL
) ” in DEVICE BUS OPERATION.
1
18
, A
17
, A
6
, A
16
1
, A
, A
15
0
)
, A
14
(0, 1, 0)
V
, A
IH
) ” and
13
, and A
-90/10
12
will
9