ds3171n Maxim Integrated Products, Inc., ds3171n Datasheet - Page 53
![no-image](/images/no-image-200.jpg)
ds3171n
Manufacturer Part Number
ds3171n
Description
Ds3171, Ds3172, Ds3173, Ds3174 Single/dual/triple/quad Ds3/e3 Single-chip Transceivers
Manufacturer
Maxim Integrated Products, Inc.
Datasheet
1.DS3171N.pdf
(234 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
- Current page: 53 of 234
- Download datasheet (2Mb)
DS3171/DS3172/DS3173/DS3174
signal pins can be timed to a single clock reference without concern about having the clock source change during
loopbacks.
10.2.1.1.1 LIU Enabled, Loop Timing Enabled
In this mode, the receive LIU sources the clock for both the receive and transmit logic. The RCLKOn, TCLKOn and
TLCLKn clock output pins will be the same. The transmit or receive line payload signal pins can be timed to any of
these clock. The use of the RCLKOn pin as the timing source is suggested. If RCLKOn is used as the timing
source, be sure to set PORT.CR3.RFTS = 0 for output timing.
10.2.1.1.2 LIU Disabled, Loop Timing Enabled
In this mode, the RLCLKn pins are the source of the clock for both the receive and transmit logic. The RCLKOn,
TCLKOn and TLCLKn clock output pins will both be the same as the RLCLKn clock. The transmit or receive line
payload signals can be timed to any of these clock pins. The use of the RLCLKn pin as the timing source is
suggested. If RLCLKn is used as the timing source, be sure to set PORT.CR3.RFTS = 1 for input timing.
10.2.1.2 Loop Timing Disabled
When loop timing is disabled, the transmit clock source can be different than the receive clock source. The
loopback functions, LLB, PLB and DLB, will cause the clock sources to switch when they are activated. Care must
be taken when selecting the clock reference for the transmit and receive signals.
The most versatile clocking option has the receive line interface signals timed to RLCLKn, the transmit line
interface signals timed to TLCLKn, the receive framer signals timed to RCLKOn, and the transmit framer signals
timed to TCLKOn. This clocking arrangement works in all modes.
When LLB is enabled, the clock on the TLCLKn pins will switch to the clock from the RLCLKn pins or RX LIU. It is
recommended that the transmit line interface signals be timed to the TLCLKn pins. If TLCLKn is used as the timing
source, be sure to set PORT.CR3.TLTS = 0 for output timing.
When PLB is enabled, the TCLKIn pin will not be used and the internal transmit clock is switched to the internal
receive clock. The clock on the TCLKOn pins will switch to the clock from the RLCLKn pins or RX LIU. The framer
input signals will be ignored while PLB is enabled. It is recommended that the transmit line interface signals be
timed to the TCLKOn pins.
When DLB is enabled, the internal receive clock is switched to the internal transmit clock which is sourced from the
TCLKIn pins or one of the CLAD clocks, and the clock on the RLCLKn pins or from the RX LIU will not be used.
The clock on the RCLKOn pins will switch to the clock on the TCLKIn pins or one of the CLAD clocks. The receive
line signals from the RX LIU or line interface pins will be ignored. It is recommended that the receive framer pins be
timed to the RCLKOn pins. If TCLKOn is used as the timing source, be sure to set PORT.CR3.TFTS = 0 for output
timing.
When both DLB and LLB are enabled, the TLCLKn clock pins are connected to either the RX LIU recovered clock
or the RLCLKn clock pins, and the RCLKOn clock pins will be connected to the TCLKIn clock pins or one of the
CLAD clocks. It is recommended that the transmit line signals be timed to the TLCLKn pins, the receive line
interface signals be timed to the RLCLKn pins, the receive framer signals be timed to the RCLKOn pins, and the
transmit framer signals be timed to the TCLKOn pins.
10.2.1.2.1 LIU Enabled - CLAD Timing Disabled – no LB
In this mode, the receive LIU sources the clock for the receive logic and the TCLKIn pins source the clock for the
transmit logic.
10.2.1.2.2 LIU Enabled - CLAD Timing Enabled – no LB
In this mode, the receive LIU sources the clock for the receive logic and one of the CLAD clocks sources the clock
for the transmit logic.
10.2.1.2.3 LIU Disabled - CLAD Timing Disabled – no LB
In this mode, the RLCLKn pins source the clock for the receive logic and the TCLKIn pins source the clock for the
transmit logic.
53
Related parts for ds3171n
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
![mxd1210](/images/no-image3.png)
Part Number:
Description:
Nonvolatile Ram Controller Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![ds2065w](/images/no-image3.png)
Part Number:
Description:
3.3v Single-piece 8mb Nonvolatile Sram Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![ds1865](/images/no-image3.png)
Part Number:
Description:
Pon Triplexer Control And Monitoring Circuit Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![dg300aa](/images/no-image3.png)
Part Number:
Description:
Ttl Compatible Cmos Analog Switches Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![dg421dy](/images/no-image3.png)
Part Number:
Description:
Improved Low-power, Cmos Analog Switches With Latches Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![max9789a](/images/no-image3.png)
Part Number:
Description:
Windows Vista-compliant, Stereo Class Ab Speaker Amplifiers And Directdrive Headphone Amplifiers Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![max5054bata](/images/no-image3.png)
Part Number:
Description:
4a, 20ns, Dual Mosfet Drivers Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![max2003cse](/images/no-image3.png)
Part Number:
Description:
Nicd/nimh Battery Fast-charge Controllers Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![max2235eup](/images/no-image3.png)
Part Number:
Description:
3.6v, 1w Autoramping Power Amplifier For 900mhz Applications Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![max2264eue](/images/no-image3.png)
Part Number:
Description:
2.7v, Single-supply, Cellular-band Linear Power Amplifiers Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![max2841ebc-t](/images/no-image3.png)
Part Number:
Description:
5ghz Linear Power Amplifiers Integrated Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![MAX3514EVKIT](/images/no-image3.png)
Part Number:
Description:
Evaluation Kits for the MAX3514
Manufacturer:
Maxim Integrated Products, Inc.
![max9722beue](/images/no-image3.png)
Part Number:
Description:
5v, Differential Input, Directdrive, 130mw Stereo Headphone Amplifiers With Shutdown Products
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![DS32C35](/images/no-image3.png)
Part Number:
Description:
Accurate I2c Rtc With Integrated Tcxo/crystal/fram
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet:
![ds1863](/images/no-image3.png)
Part Number:
Description:
Ds1863 Burst-mode Pon Controller With Integrated Monitoring
Manufacturer:
Maxim Integrated Products, Inc.
Datasheet: