saf7118 NXP Semiconductors, saf7118 Datasheet - Page 58

• Manufacturer Part Number: saf7118
• Description: Multistandard Video Decoder With Adaptive Comb Filter And Component Video Input
• Manufacturer: NXP Semiconductors

Philips Semiconductors
SAF7118_3
Product data sheet
Fig 37. Basic problem of interlaced vertical scaling (example: downscale
field 1
8.4.3.3 Use of the vertical phase offsets
unscaled input
scale dependent start offset
As described in
interlaced input sequence. Additionally the interpretation and timing between ITU 656 field
ID and real-time detection by means of the state of H-sync at the falling edge of V-sync
may result in different field ID interpretation.
A vertically scaled interlaced output also gets a larger vertical sampling phase error, if the
interlaced input fields are processed, without regard to the actual scale at the starting
point of operation
For correct interlaced processing the vertical scaler must be used with respect to the
interlace properties of the input signal and, if required, for conversion of the field
sequences.
Four events should be considered, they are illustrated in
field 2
Section
Figure
field 1
Rev. 03 — 16 February 2006
8.4.1.3, the scaler processing may run randomly over the
no phase offset
37.
scaled output,
mismatched vertical line distances
Multistandard video decoder with adaptive comb filter
field 2
3
5
field 1
)
with phase offset
scaled output,
correct scale dependent position
Figure
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
38.
field 2
SAF7118
mhb547
58 of 170