tb62217afg TOSHIBA Semiconductor CORPORATION, tb62217afg Datasheet - Page 46
![no-image](/images/manufacturer_photos/0/6/670/toshiba_semiconductor_corporation_sml.jpg)
tb62217afg
Manufacturer Part Number
tb62217afg
Description
Pwm Drive Stepping Motor Driver / Brush Dc Motor Driver Selectable, Dc-dc Converter And Reset Function Ic
Manufacturer
TOSHIBA Semiconductor CORPORATION
Datasheet
1.TB62217AFG.pdf
(61 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Calculating the Motor Setting Constant Current
Iout (max)
Assume, for example:
Producing Iout = 1.0 A requires R
The error of constant current setting is 5 % when excluding Vref and Rs .
Calculating the Oscillation Frequency
(chopping reference frequency) for the Motor and DC-DC Converter Blocks
The motor setting current value is determined by R
The Vref (gain) is fixed at 1/10 for stepping motors and selectable from 1/10 and 1/20 for DC motors.
Vref (gain)
Vref 2 (V)
Torque 100 (%)
(1) Calculating the OSC Reference Frequency for the Motor Block (typical)
(2) Calculating the OSC Frequency for the DC-DC Converter Block (typical)
Hence, the OSC frequency for the motor block is about 810 kHz when Cosc_M = 220 pF.
The chopping frequency for stepping motors is about 1/8 the above frequency, that is, 810/8 (= 101) kHz.
In addition, only the fast decay mode is available for DC motor drive.
Hence, the OSC frequency for the DC-DC converter block is about 100 kHz when Cosc_D = 120 pF.
Vref (gain) u Vref (V) u
1/10: The attenuation ratio is typically 1/10 when Vref = 1/10.
fosc_M 61820 u C (pF) ^ 0.8043 (kHz)
f OSCD
5315.3 u C (pF) ^ 0.8341 (kHz)
RS
= 0.20 : (at least 0.2 W).
Torque
(Torque
RS
100,
46
and Vref as follows:
R
RS
85,
(
:
70,
)
u
50%
100%
:
input serial data
‡
ˆ »
)
TB62217AFG
2004-11-12