agln060v2-zvqg100i Actel Corporation, agln060v2-zvqg100i Datasheet - Page 11
![no-image](/images/no-image-200.jpg)
agln060v2-zvqg100i
Manufacturer Part Number
agln060v2-zvqg100i
Description
Igloo Nano Low-power Flash Fpgas With Flash*freeze Technology
Manufacturer
Actel Corporation
Datasheet
1.AGLN060V2-ZVQG100I.pdf
(132 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
AGLN060V2-ZVQG100I
Manufacturer:
Actel
Quantity:
197
Company:
Part Number:
AGLN060V2-ZVQG100I
Manufacturer:
Microsemi SoC
Quantity:
10 000
User Nonvolatile FlashROM
Actel IGLOO nano devices have 1 kbit of on-chip, user-accessible, nonvolatile FlashROM. The
FlashROM can be used in diverse system applications:
The FlashROM is written using the standard IGLOO nano IEEE 1532 JTAG programming interface.
The core can be individually programmed (erased and written), and on-chip AES decryption can be
used selectively to securely load data over public networks (except in the AGLN030 and smaller
devices), as in security keys stored in the FlashROM for a user design.
The FlashROM can be programmed via the JTAG programming interface, and its contents can be
read back either through the JTAG programming interface or via direct FPGA core addressing. Note
that the FlashROM can only be programmed from the JTAG interface and cannot be programmed
from the internal logic array.
The FlashROM is programmed as 8 banks of 128 bits; however, reading is performed on a byte-by-
byte basis using a synchronous interface. A 7-bit address from the FPGA core defines which of the 8
banks and which of the 16 bytes within that bank are being read. The three most significant bits
(MSBs) of the FlashROM address determine the bank, and the four least significant bits (LSBs) of
the FlashROM address define the byte.
The Actel IGLOO nano development software solutions, Libero
(IDE) and Designer, have extensive support for the FlashROM. One such feature is auto-generation
of sequential programming files for applications requiring a unique serial number in each part.
Another feature enables the inclusion of static data for system version control. Data for the
FlashROM can be generated quickly and easily using Actel Libero IDE and Designer software tools.
Comprehensive programming file support is also included to allow for easy programming of large
numbers of parts with differing FlashROM contents.
SRAM and FIFO
IGLOO nano devices (except the AGLN030 and smaller devices) have embedded SRAM blocks along
their north and south sides. Each variable-aspect-ratio SRAM block is 4,608 bits in size. Available
memory configurations are 256×18, 512×9, 1k×4, 2k×2, and 4k×1 bits. The individual blocks have
independent read and write ports that can be configured with different bit widths on each port.
For example, data can be sent through a 4-bit port and read as a single bitstream. The embedded
SRAM blocks can be initialized via the device JTAG port (ROM emulation mode) using the UJTAG
macro (except in the AGLN030 and smaller devices).
In addition, every SRAM block has an embedded FIFO control unit. The control unit allows the
SRAM block to be configured as a synchronous FIFO without using additional core VersaTiles. The
FIFO width and depth are programmable. The FIFO also features programmable Almost Empty
(AEMPTY) and Almost Full (AFULL) flags in addition to the normal Empty and Full flags. The
embedded FIFO control unit contains the counters necessary for generation of the read and write
address pointers. The embedded SRAM/FIFO blocks can be cascaded to create larger configurations.
•
•
•
•
•
•
•
•
Internet protocol addressing (wireless or fixed)
System calibration settings
Device serialization and/or inventory control
Subscription-based business models (for example, set-top boxes)
Secure key storage for secure communications algorithms
Asset management/tracking
Date stamping
Version management
A dv a n c e v 0. 8
®
Integrated Design Environment
IGLOO nano Device Overview
1 - 7