pn5321a3hn/c101 NXP Semiconductors, pn5321a3hn/c101 Datasheet - Page 10

• Manufacturer Part Number: pn5321a3hn/c101
• Description: Nfc Controller
• Manufacturer: NXP Semiconductors

Philips Semiconductors
9397 750 XXXXX
Short form data sheet
9.1.3 Operating Modes
The CL module support the following operating modes:
The modes support different transfer speeds and modulation schemes. The following
chapters will explain the different modes more in detail.
Note: All indicated modulation indexes and modes in this chapter are system parameters.
This means that beside the IC settings a suitable antenna tuning is required to achieve the
optimal performance.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
typical operating distance in NFCIP-1 mode up to 50 mm depending on the antenna
size and tuning and power supply
typical operating distance in ISO 14443A / MIFARE
mode of about 100 mm depending on the antenna size and tuning and the external
field strength
Supports MIFARE
Supports ISO 14443A higher transfer speed communication at 212 kbit/s and
424 kbit/s
Supports contactless communication according to the
and 424 kbit/s
Integrated RF interface for NFCIP-1 up to 424 kbit/s
Possibility to communicate on the RF interface above 424 kbit/s using external analog
circuitry
Support of the S2C interface
64 byte send and receive FIFO-buffer
Programmable timer
CRC Co-processor
internal self test
2 interrupt sources
Integrated RF Level detector
Integrated RF interface for NFCIP-1 up to 424 kbit/s
Reader/writer mode supporting ISO14443A / MIFARE
schemes.
Card operation mode supporting ISO14443A / MIFARE
NFCIP-1 mode
Rev. 1.2 — 12 January 2006
®
Classic encryption in reader / writer mode
®
card or FeliCa™ card operation
®
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
FeliCa
, Felica™ and ISO14443B
®
and Felica™ schemes
™ scheme at 212 kbit/s
PN532/C1
NFC controller
10 of 25