ta1395fng TOSHIBA Semiconductor CORPORATION, ta1395fng Datasheet - Page 22

• Manufacturer Part Number: ta1395fng
• Description: Mixer/oscillator And Pll Ic For Tv/vcr Tuner
• Manufacturer: TOSHIBA Semiconductor CORPORATION

HANDLING PRECAUTIONS
1.
2.
3.
4.
Using a human charge model (C=100pF, R=1.5kΩ, test repeated three times), the product’s electrostatic resistance
was determined to be low in the following cases.
Accordingly, please handle the product with care.
The device should not be inserted into or removed from the test apparatus while the voltage is being applied;
otherwise breakdown or deterioration in performance of the device may result.
Also, avoid any abrupt increasing or decreasing of the voltage.
Overshoot or chattering of the power supply may cause the IC to be degraded.
To avoid this problem, equip the power supply line with filters.
The peripheral circuits described in this datasheet are given only as system examples for evaluating the performance
of the device. Toshiba neither recommend the configuration or related values of the peripheral circuits nor intend to
manufacture such application systems in large quantities.
Please note that the high-frequency characteristics of the device may vary depending on the external components,
mounting method and other factors relating to the application design. Therefore it is the responsibility of users
incorporating the device into their designs to evaluate the characteristics of application circuits.
Toshiba only guarantee the quality and characteristics of the device as described in this datasheet and do not assume
any responsibility for the customer’s application design.
In order better to understand the quality and reliability of Toshiba semiconductor products and to incorporate them
into designs in an appropriate manner, please refer to the latest Semiconductor Reliability Handbook (Integrated
Circuits) published by Toshiba Semiconductor Company.
The handbook can also be viewed online at ‘’ http://www.semicon.toshiba.co.jp/ ’’
(1)
(2)
(3)
When a positive voltage is applied across pin1(UHF RF input) and Vcc and any GND.
When a positive voltage is applied across pin2(VHF RF input) and any GND.
When a positive voltage is applied across pin16(Vt output) and Vcc and any GND.
22
TA1395FNG
2005/05/20