dm9000b Davicom Semiconductor, Inc., dm9000b Datasheet - Page 33
dm9000b
Manufacturer Part Number
dm9000b
Description
Ethernet Controller With General Processor Interface
Manufacturer
Davicom Semiconductor, Inc.
Datasheet
1.DM9000B.pdf
(56 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
dm9000bEP
Manufacturer:
VISHAY
Quantity:
1 822
Part Number:
dm9000bEP
Manufacturer:
DAVICOM
Quantity:
20 000
Company:
Part Number:
dm9000bIEP
Manufacturer:
IXYS
Quantity:
115
Company:
Part Number:
dm9000bIEP
Manufacturer:
DAVICOM
Quantity:
1 000
8.8 DAVICOM Specified Configuration Register (DSCR) - 16
Final
Version: DM9000B-13-DS-F02
June 4, 2009
16.15
16.14
16.13
16.12
16.10
16.11
16.9
16.8
16.7
16.6
16.5
16.4
6.2
6.1
6.0
Bit
COLLED_CTL
LP_AN_ABLE
RPDCTR-EN
SPLED_CTL
F_LINK_100
BP_ADPOK
BP_ALIGN
PAGE_RX
NP_ABLE
Bit Name
BP_4B5B
Reserved
Reserved
Reserved
BP_SCR
TX/FX
0, RO/LH
Default
0,RO/P
0, RW
0, RW
0, RW
1, RW
0, RW
0, RW
0, RW
0, RW
1, RW
0, RO
0, RO
0, RW
0,RW
Local Device Next Page Able
NP_ABLE = 1: DM9000B, next page available
NP_ABLE = 0: DM9000B, no next page
DM9000B does not support this function, so this bit is always 0
New Page Received
A new link code word page received. This bit will be automatically
cleared when the register (register 6) is read by management
Link Partner Auto-negotiation Able
A “1” in this bit indicates that the link partner supports
Auto-negotiation
Bypass 4B5B Encoding and 5B4B Decoding
1 = 4B5B encoder and 5B4B decoder function bypassed
0 = Normal 4B5B and 5B4B operation
Bypass Scrambler/Descrambler Function
1 = Scrambler and descrambler function bypassed
0 = Normal scrambler and descrambler operation
Bypass Symbol Alignment Function
1 = Receive functions (descrambler, symbol alignment and symbol
decoding functions) bypassed. Transmit functions (symbol encoder
and scrambler) bypassed
0 = Normal operation
BYPASS ADPOK
Force signal detector (SD) active. This register is for debug only,
not release to customer
1=Forced SD is OK,
0=Normal operation
Reserved
Force to 0 in application.
100BASE-TX/FX Mode Control
1 = 100BASE-TX operation
0 = 100BASE-FX operation
Reserved
Reserved
Force to 0 in application.
Force Good Link in 100Mbps
1 = Force 100Mbps good link status
0 = Normal 100Mbps operation
This bit is useful for diagnostic purposes
Reserved
Force to 0 in application.
Reserved
Force to 0 in application.
Reduced Power Down Control Enable
This bit is used to enable automatic reduced power down
1 = Enable automatic reduced power down
0 = Disable automatic reduced power down
Ethernet Controller with General Processor Interface
Description
DM9000B
33