CS4341_05 CIRRUS [Cirrus Logic], CS4341_05 Datasheet - Page 27
![no-image](/images/no-image-200.jpg)
CS4341_05
Manufacturer Part Number
CS4341_05
Description
24-Bit, 96 kHz Stereo DAC with Volume Control
Manufacturer
CIRRUS [Cirrus Logic]
Datasheet
1.CS4341_05.pdf
(34 pages)
6.3
DS298F5
6.3.1 CHANNEL A VOLUME = CHANNEL B VOLUME (A = B)
6.3.2 SOFT RAMP AND ZERO CROSS CONTROL (SZCX)
A = B
7
0
TRANSITION AND MIXING CONTROL (ADDRESS 02H)
Function:
Function:
Immediate Changes
Changes On Zero Crossings
Soft Ramped Changes
Soft Ramped Changes on Zero Crossings
Default = 0
0 - Disabled
1 - Enabled
The AOUTA and AOUTB volume levels are independently controlled by the A and the B Channel Vol-
ume Control Bytes when this function is disabled. The volume on both AOUTA and AOUTB are de-
termined by the A Channel Volume Control Byte and the B Channel Byte is ignored when this function
is enabled.
Default = 10
00 - Immediate Changes
01 - Changes On Zero Crossings
10 - Soft Ramped Changes
11 - Soft Ramped Changes On Zero Crossings
When Immediate Changes is selected all level changes will take effect immediately in one step.
Changes on Zero Crossings dictates that signal level changes, either by attenuation changes or mut-
ing, will occur on a signal zero crossing to minimize audible artifacts. The requested level change will
occur after a timeout period between 512 and 1024 sample periods (10.7 ms to 21.3 ms at 48 kHz
sample rate) if the signal does not encounter a zero crossing. The zero cross function is independent-
ly monitored and implemented for each channel.
Soft Ramped Changes allows level changes, both muting and attenuation, to be implemented by in-
crementally ramping, in 1/8 dB steps, from the current level to the new level at a rate of 1dB per 8
left/right clock periods.
Soft Ramped Changes On Zero Crossings dictates that signal level changes, either by attenuation
changes or muting, will occur in 1/8 dB steps implemented on a signal zero crossing. The 1/8 dB level
change will occur after a timeout period between 512 and 1024 sample periods (10.7 ms to 21.3 ms
at 48 kHz sample rate) if the signal does not encounter a zero crossing. The zero cross function is
independently monitored and implemented for each channel.
SZC1
6
1
SZC0
5
0
ATAPI4
4
0
ATAPI3
3
1
BIT 5-6
BIT 7
ATAPI2
2
0
ATAPI1
1
0
CS4341
ATAPI0
0
1
27