C509-L_97 SIEMENS [Siemens Semiconductor Group], C509-L_97 Datasheet - Page 196
C509-L_97
Manufacturer Part Number
C509-L_97
Description
8-Bit CMOS Microcontroller
Manufacturer
SIEMENS [Siemens Semiconductor Group]
Datasheet
1.C509-L_97.pdf
(290 pages)
- Current page: 196 of 290
- Download datasheet (5Mb)
6.6.6 A/D Converter Calibration
The C509-L A/D converter includes hidden internal calibration mechanisms which assure a save
functionality of the A/D converter according to the DC characteristics. The A/D converter calibration
is implemented in a way that a user program which executes A/D conversions is not affected by its
operation. Further, the user program has no control on the calibration mechanism. The calibration
itself executes two basic functions :
The A/D converter calibration operates in two phases : calibration after a reset operation and
calibration at each A/D conversion. The calibration phases are controlled by a state machine in the
A/D converter. This state machine executes the calibration phases and stores the calibration results
dynamically in a small calibration RAM
After a reset operation the A/D calibration is automatically started. This reset calibration phase
which takes 3328 f
12 MHz oscillator frequency and with the default after reset prescaler value of 8, a reset calibration
time of approx. 2.2 ms is reached. For achieving a proper reset calibration, the f
must satisfy the condition f
After the reset calibration phase the A/D converter is calibrated according to its DC characteristics.
Nevertheless, during the reset calibration phase single or continuous A/D can be executed. In this
case it must be regarded that the reset calibration is interrupted and continued after the end of the
A/D conversion. Therefore, interrupting the reset calibration phase by A/D conversions extends the
total reset calibration time. If the specified total unadjusted error (TUE) has to be valid for an A/D
conversion, it is recommended to start the first A/D conversions after reset when the reset
calibration phase is finished. Depending on the oscillator frequency used, the reset calibration
phase can be possibly shortened by setting ADCL1 and ADCL0 (prescaler value) to its final value
immediately after reset.
After the reset calibration, a second calibration mechanism is initiated. This calibration is coupled
to each A/D conversion. With this second calibration mechanism alternatively offset and linearity
calibration values, stored in the calibration RAM, are always checked when an A/D conversion is
executed and corrected if required.
Semiconductor Group
– Offset calibration
– Linearity calibration
ADC
clocks, alternating offset and linearity calibration is executed. Therefore, at
ADC max
: compensation of the offset error of the internal comparator
: correction of the binary weighted capacitor network
2 MHz.
6-118
On-Chip Peripheral Components
ADC
prescaler value
1997-10-01
C509-L
Related parts for C509-L_97
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
Watts 28volts 200-450
Manufacturer:
ETC-unknow
Datasheet:
Part Number:
Description:
50 WATTS - 28VOLTS 200-450 MHZ
Manufacturer:
ETC [List of Unclassifed Manufacturers]
Datasheet:
Part Number:
Description:
Intel 80C32 - Siemens SAB-C501, Nearest Equivalent Replacement
Manufacturer:
Siemens Semiconductor Group
Part Number:
Description:
HiRel Silicon Schottky Diode (HiRel Discrete and Microwave Semiconductor Medium barrier diodes for detector and mixer applications)
Manufacturer:
SIEMENS [Siemens Semiconductor Group]
Datasheet:
Part Number:
Description:
HiRel Silicon PIN Diode (HiRel Discrete and Microwave Semiconductor Current controlled RF resistor for RF attenuators and switches)
Manufacturer:
SIEMENS [Siemens Semiconductor Group]
Datasheet:
Part Number:
Description:
HiRel Silicon PIN Diode (HiRel Discrete and Microwave Semiconductor Current controlled RF resistor for RF attenuators and switches)
Manufacturer:
SIEMENS [Siemens Semiconductor Group]
Datasheet:
Part Number:
Description:
GaAs-Infrarot-Sendediode GaAs Infrared Emitter
Manufacturer:
SIEMENS [Siemens Semiconductor Group]
Datasheet:
Part Number:
Description:
GaAlAs-Infrarot-Sendediode GaAlAs Infrared Emitter
Manufacturer:
SIEMENS [Siemens Semiconductor Group]
Datasheet:
Part Number:
Description:
IGBT MODULE
Manufacturer:
Siemens Semiconductor Group
Datasheet:
Part Number:
Description:
SIMOPAC Module (Power module Single switch N channel Enhancement mode)
Manufacturer:
Siemens Semiconductor Group
Datasheet:
Part Number:
Description:
(BSMxxx) TRANSISTOR
Manufacturer:
Siemens Semiconductor Group
Datasheet:
Part Number:
Description:
SIMOPAC Module (Power module Single switch N channel Enhancement mode)
Manufacturer:
Siemens Semiconductor Group
Datasheet:
Part Number:
Description:
main ratings
Manufacturer:
Siemens Semiconductor Group
Datasheet:
Part Number:
Description:
Manufacturer:
Siemens Semiconductor Group
Datasheet: