CY7C68300 CYPRESS [Cypress Semiconductor], CY7C68300 Datasheet - Page 4
![no-image](/images/no-image-200.jpg)
CY7C68300
Manufacturer Part Number
CY7C68300
Description
Manufacturer
CYPRESS [Cypress Semiconductor]
Datasheet
1.CY7C68300.pdf
(26 pages)
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
CY7C68300-56LFC
Manufacturer:
CY
Quantity:
4 082
Company:
Part Number:
CY7C68300-56PV
Manufacturer:
CY
Quantity:
56
Company:
Part Number:
CY7C68300-56PVC
Manufacturer:
CYPRESS
Quantity:
5 000
Part Number:
CY7C68300-56PVC
Manufacturer:
CYPRESS/赛普拉斯
Quantity:
20 000
Company:
Part Number:
CY7C68300A-56LFC
Manufacturer:
CYPRESS
Quantity:
5 000
Part Number:
CY7C68300A-56LFC
Manufacturer:
CYPRESS/赛普拉斯
Quantity:
20 000
Company:
Part Number:
CY7C68300A-56LFXC
Manufacturer:
CYPRESS
Quantity:
1 069
Part Number:
CY7C68300A-56LFXC
Manufacturer:
CYPRESS/赛普拉斯
Quantity:
20 000
Part Number:
CY7C68300A-56PVC
Manufacturer:
CYPRESS/赛普拉斯
Quantity:
20 000
Part Number:
CY7C68300B
Manufacturer:
CYPRESS/赛普拉斯
Quantity:
20 000
1.0
The EZ-USB AT2 implements a fixed function bridge between one USB port and one ATA- or ATAPI-based mass storage device
port. This bridge adheres to the Mass Storage Class Bulk-Only Transport Specification and is intended for self-powered devices.
The USB port of the EZ-USB AT2 is connected to a host computer directly or via the downstream port of a USB hub. Host software
issues commands and data to the EZ-USB AT2 and receives status and data from the EZ-USB AT2 using standard USB protocol.
The ATA/ATAPI port of the EZ-USB AT2 is connected to a mass storage device. A 4-Kbyte buffer maximizes ATA/ATAPI data
transfer rates by minimizing losses due to device seek times. The ATA interface supports ATA PIO modes 0, 3, and 4, and Ultra
DMA modes 2 and 4.
The device initialization process is configurable, enabling the EZ-USB AT2 to initialize ATA/ATAPI devices without software
intervention.
1.1
Document #: 38-08011 Rev. *B
• Complies with USB-IF specifications for USB 2.0, the USB Mass Storage Class, and the USB Mass Storage Class
• Operates at high (480-Mbps) or full (12-Mbps) speed
• Complies with T13’s ATA/ATAPI-6 Draft Specification
• Supports 48-bit addressing for large hard drives
• Supports PIO modes 0, 3, 4, and UDMA modes 2, 4
• Uses one external serial EEPROM containing the USB device serial number, vendor and product identification data,
• ATA interface IRQ signal support
• Support for ATA/ATAPI devices configured either as master or slave
• “ATA-Enable” input signal, which three-states all signals on the ATA interface in order to allow sharing of the bus
• Support for board-level manufacturing test via USB interface
• 3.3V operation for self-powered devices
• 56-pin SSOP and 56-pin QFN packages.
Bulk-Only Transport Specification
and device configuration data
with another controller (e.g., an IEEE-1394 to ATA bridge chip)
Features
Introduction
CY7C68300
Page 4 of 26