PIC18F24 MICROCHIP [Microchip Technology], PIC18F24 Datasheet - Page 111

• Manufacturer Part Number: PIC18F24
• Description: 28/40-Pin High-Performance, Enhanced Flash Microcontrollers with CAN Module
• Manufacturer: MICROCHIP [Microchip Technology]

11.0
The Timer0 module has the following features:
• Software selectable as an 8-bit or
• Readable and writable
• Dedicated 8-bit software programmable prescaler
• Clock source selectable to be external or internal
• Interrupt-on-overflow from FFh to 00h in 8-bit
• Edge select for external clock
REGISTER 11-1:
 2004 Microchip Technology Inc.
16-bit timer/counter
mode and FFFFh to 0000h in 16-bit mode
TIMER0 MODULE
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2-0
T0CON: TIMER0 CONTROL REGISTER
bit 7
TMR0ON: Timer0 On/Off Control bit
1 = Enables Timer0
0 = Stops Timer0
T08BIT: Timer0 8-bit/16-bit Control bit
1 = Timer0 is configured as an 8-bit timer/counter
0 = Timer0 is configured as a 16-bit timer/counter
T0CS: Timer0 Clock Source Select bit
1 = Transition on T0CKI pin
0 = Internal instruction cycle clock (CLKO)
T0SE: Timer0 Source Edge Select bit
1 = Increment on high-to-low transition on T0CKI pin
0 = Increment on low-to-high transition on T0CKI pin
PSA: Timer0 Prescaler Assignment bit
1 = TImer0 prescaler is not assigned. Timer0 clock input bypasses prescaler.
0 = Timer0 prescaler is assigned. Timer0 clock input comes from prescaler output.
T0PS2:T0PS0: Timer0 Prescaler Select bits
111 = 1:256 Prescale value
110 = 1:128 Prescale value
101 = 1:64 Prescale value
100 = 1:32 Prescale value
011 = 1:16 Prescale value
010 = 1:8
001 = 1:4
000 = 1:2
Legend:
R = Readable bit
-n = Value at POR
TMR0ON
R/W-1
Prescale value
Prescale value
Prescale value
T08BIT
R/W-1
R/W-1
T0CS
W = Writable bit
‘1’ = Bit is set
R/W-1
T0SE
Register 11-1 shows the Timer0 Control register
(T0CON).
Figure 11-1 shows a simplified block diagram of the
Timer0 module in 8-bit mode and Figure 11-2 shows a
simplified block diagram of the Timer0 module in 16-bit
mode.
The T0CON register is a readable and writable register
that controls all the aspects of Timer0, including the
prescale selection.
Note:
R/W-1
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
PSA
Timer0 is enabled on POR.
T0PS2
R/W-1
PIC18FXX8
x = Bit is unknown
T0PS1
R/W-1
DS41159D-page 109
T0PS0
R/W-1
bit 0