MC68HC908LJ12CPB FREESCALE [Freescale Semiconductor, Inc], MC68HC908LJ12CPB Datasheet - Page 84

• Manufacturer Part Number: MC68HC908LJ12CPB
• Description: 8-bit microcontroller units
• Manufacturer: FREESCALE [Freescale Semiconductor, Inc]

6.6.2 Stop Mode
6.7 CPU During Break Interrupts
6.8 Instruction Set Summary
6.9 Opcode Map
MC68HC908LJ12
Freescale Semiconductor
—
Rev. 2.1
The STOP instruction:
After exiting stop mode, the CPU clock begins running after the oscillator
stabilization delay.
If the break module is enabled, a break interrupt causes the CPU to
execute the software interrupt instruction (SWI) at the completion of the
current CPU instruction. (See
program counter vectors to $FFFC–$FFFD ($FEFC–$FEFD in monitor
mode).
A return-from-interrupt instruction (RTI) in the break routine ends the
break interrupt and returns the MCU to normal operation if the break
interrupt has been deasserted.
Table 6-1
The opcode map is provided in
•
•
Clears the interrupt mask (I bit) in the condition code register,
enabling external interrupts. After exit from stop mode by external
interrupt, the I bit remains clear. After exit by reset, the I bit is set.
Disables the CPU clock.
provides a summary of the M68HC08 instruction set.
Central Processor Unit (CPU)
Section 22. Break Module
Table
6-2.
Central Processor Unit (CPU)
(BRK).) The
Technical Data
85