TJA1080ATS/1 NXP [NXP Semiconductors], TJA1080ATS/1 Datasheet - Page 34

• Manufacturer Part Number: TJA1080ATS/1
• Description: FlexRay transceiver
• Manufacturer: NXP [NXP Semiconductors]

NXP Semiconductors
Table 13.
All parameters are guaranteed for V
T
ground; positive currents flow into the IC.
[1]
[2]
[3]
TJA1080A_2
Preliminary data sheet
Symbol
Power-on reset
V
V
V
vj
th(det)POR
th(rec)POR
hys(POR)
= 40 C to +150 C; R
All parameters are guaranteed over the virtual junction temperature range by design, but only 100 % are tested at 125 C for dies on
wafer level (pre-testing) and above this for cased products 100 % are tested at T
specified. Both pre-testing and final testing use correlated test conditions to cover the specified temperature and power supply voltage
range. For bare dies all parameters are only guaranteed with the backside of the bare die connected to ground.
Current flows from V
These values are based on measurements taken on several samples (less than 10 pieces). These measurements have taken place in
the laboratory and have been done at T
industrial test will be performed on production products.
Static characteristics
Parameter
power-on reset detection
threshold voltage
power-on reset recovery
threshold voltage
power-on reset hysteresis
voltage
CC
to V
bus
BUF
= 45 ; R
. This means that the maximum sum current I
…continued
BAT
= 6.5 V to 60 V; V
TRXD
amb
[1]
= 25 C and T
Conditions
= 200
Rev. 02 — 26 August 2008
unless otherwise specified. All voltages are defined with respect to
amb
CC
= 125 C. No characterization has been done for these parameters. No
= 4.75 V to 5.25 V; V
CC
amb
+ I
BUF
= 40 C and +25 C (final testing) unless otherwise
BUF
Min
3.0
3.1
100
is 35 mA.
= 4.75 V to 5.25 V; V
Typ
-
-
-
TJA1080A
FlexRay transceiver
© NXP B.V. 2008. All rights reserved.
IO
Max
3.4
3.5
200
= 2.2 V to 5.25 V;
34 of 50
Unit
V
V
mV