ATMEGA644PV ATMEL [ATMEL Corporation], ATMEGA644PV Datasheet - Page 153

• Manufacturer Part Number: ATMEGA644PV
• Description: 8-bit Microcontroller with 16/32/64K Bytes In-System Programmable Flash
• Manufacturer: ATMEL [ATMEL Corporation]

8011D–AVR–02/07
When OC2B is connected to the pin, the function of the COM2B1:0 bits depends on the
WGM22:0 bit setting.
are set to a normal or CTC mode (non-PWM).
Table 15-5.
Table 15-6
mode.
Table 15-6.
Note:
Table 15-7
rect PWM mode.
Table 15-7.
Note:
• Bits 3:2 – Res: Reserved Bits
These bits are reserved bits in the ATmega164P/324P/644P and will always read as zero.
COM2B1
COM2B1
COM2B1
0
0
1
1
0
0
1
1
0
0
1
1
1. A special case occurs when OCR2B equals TOP and COM2B1 is set. In this case, the Com-
1. A special case occurs when OCR2B equals TOP and COM2B1 is set. In this case, the Com-
pare Match is ignored, but the set or clear is done at BOTTOM. See
page 144
pare Match is ignored, but the set or clear is done at TOP. See
page 146
shows the COM2B1:0 bit functionality when the WGM22:0 bits are set to fast PWM
shows the COM2B1:0 bit functionality when the WGM22:0 bits are set to phase cor-
Compare Output Mode, non-PWM Mode
Compare Output Mode, Fast PWM Mode
Compare Output Mode, Phase Correct PWM Mode
COM2B0
COM2B0
COM2B0
for more details.
for more details.
0
1
0
1
0
1
0
1
0
1
0
1
Table 15-5
Normal port operation, OC2B disconnected.
Toggle OC2B on Compare Match
Clear OC2B on Compare Match
Set OC2B on Compare Match
Description
Description
Normal port operation, OC2B disconnected.
Reserved
Clear OC2B on Compare Match, set OC2B at BOTTOM,
(non-inverting mode).
Set OC2B on Compare Match, clear OC2B at BOTTOM,
(inverting mode).
Description
Normal port operation, OC2B disconnected.
Reserved
Clear OC2B on Compare Match when up-counting. Set OC2B on
Compare Match when down-counting.
Set OC2B on Compare Match when up-counting. Clear OC2B on
Compare Match when down-counting.
shows the COM2B1:0 bit functionality when the WGM22:0 bits
ATmega164P/324P/644P
(1)
(1)
”Phase Correct PWM Mode” on
”Fast PWM Mode” on
153