AGL015V2-CS144 ACTEL [Actel Corporation], AGL015V2-CS144 Datasheet - Page 10
AGL015V2-CS144
Manufacturer Part Number
AGL015V2-CS144
Description
IGLOO Low-Power Flash FPGAs with Flash Freeze Technology
Manufacturer
ACTEL [Actel Corporation]
Datasheet
1.AGL015V2-CS144.pdf
(212 pages)
- Current page: 10 of 212
- Download datasheet (7Mb)
IGLOO Device Family Overview
1 -6
User Nonvolatile FlashROM
Actel IGLOO devices have 1 kbit of on-chip, user-accessible, nonvolatile FlashROM. The FlashROM
can be used in diverse system applications:
The FlashROM is written using the standard IGLOO IEEE 1532 JTAG programming interface. The
core can be individually programmed (erased and written), and on-chip AES decryption can be used
selectively to securely load data over public networks (except in the AGL015 and AGL030 devices),
as in security keys stored in the FlashROM for a user design.
The FlashROM can be programmed via the JTAG programming interface, and its contents can be
read back either through the JTAG programming interface or via direct FPGA core addressing. Note
that the FlashROM can only be programmed from the JTAG interface and cannot be programmed
from the internal logic array.
The FlashROM is programmed as 8 banks of 128 bits; however, reading is performed on a byte-by-
byte basis using a synchronous interface. A 7-bit address from the FPGA core defines which of the 8
banks and which of the 16 bytes within that bank are being read. The three most significant bits
(MSBs) of the FlashROM address determine the bank, and the four least significant bits (LSBs) of
the FlashROM address define the byte.
The Actel IGLOO development software solutions, Libero
and Designer, have extensive support for the FlashROM. One such feature is auto-generation of
sequential programming files for applications requiring a unique serial number in each part.
Another feature allows the inclusion of static data for system version control. Data for the
FlashROM can be generated quickly and easily using Actel Libero IDE and Designer software tools.
Comprehensive programming file support is also included to allow for easy programming of large
numbers of parts with differing FlashROM contents.
SRAM and FIFO
IGLOO devices (except the AGL015 and AGL030 devices) have embedded SRAM blocks along their
north and south sides. Each variable-aspect-ratio SRAM block is 4,608 bits in size. Available memory
configurations are 256×18, 512×9, 1k×4, 2k×2, and 4k×1 bits. The individual blocks have
independent read and write ports that can be configured with different bit widths on each port.
For example, data can be sent through a 4-bit port and read as a single bitstream. The embedded
SRAM blocks can be initialized via the device JTAG port (ROM emulation mode) using the UJTAG
macro (except in the AGL015 and AGL030 devices).
In addition, every SRAM block has an embedded FIFO control unit. The control unit allows the
SRAM block to be configured as a synchronous FIFO without using additional core VersaTiles. The
FIFO width and depth are programmable. The FIFO also features programmable Almost Empty
(AEMPTY) and Almost Full (AFULL) flags in addition to the normal Empty and Full flags. The
embedded FIFO control unit contains the counters necessary for generation of the read and write
address pointers. The embedded SRAM/FIFO blocks can be cascaded to create larger configurations.
PLL and CCC
IGLOO devices provide designers with very flexible clock conditioning circuit (CCC) capabilities.
Each member of the IGLOO family contains six CCCs. One CCC (center west side) has a PLL. The
AGL015 and AGL030 do not have a PLL.
The six CCC blocks are located at the four corners and the centers of the east and west sides. One
CCC (center west side) has a PLL.
•
•
•
•
•
•
•
•
Internet protocol addressing (wireless or fixed)
System calibration settings
Device serialization and/or inventory control
Subscription-based business models (for example, set-top boxes)
Secure key storage for secure communications algorithms
Asset management/tracking
Date stamping
Version management
v1.3
®
Integrated Design Environment (IDE)
Related parts for AGL015V2-CS144
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
IGLOO Low Power Flash FPGAs with Flash*Freeze Technology
Manufacturer:
MICROSEMI [Microsemi Corporation]
Datasheet:
Part Number:
Description:
40MX and 42MX FPGA Families
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
40MX and 42MX Automotive FPGA Families
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
ACT2 Family FPGAs
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
HiRel FPGAs
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
Integrator Series FPGAs: 1200XL and 3200DX Families
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
SE-CSG49-H, E-Tec lead free prototype socket drawing for CSG49 and CSG49 packages
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
SE-CSG49, E-Tec lead free prototype socket drawing for CSG49 and CSG49 packages
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
FG1152, 35x35mm, 1.00mm pitch E-tec lead free Socket Drawing
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
SE-FGG144-H, E-Tec lead free prototype socket drawing for FGG144 and FGG144 packages
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
SE-CSG180-H, E-Tec lead free prototype socket drawing for CSG180 and CSG180 packages
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
SE-CSG180, E-Tec lead free prototype socket drawing for CSG180 and CSG180 packages
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
272-27 x 27mm, 1.27mm E-TEC BGA SOCKET
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
SE-BGG272-A, E-Tec lead free prototype socket drawing for BGG272 and BGG272 packages
Manufacturer:
ACTEL [Actel Corporation]
Datasheet:
Part Number:
Description:
SE-FGG324-H, E-Tec lead free prototype socket drawing for FGG324 and FGG324 packages
Manufacturer:
ACTEL [Actel Corporation]
Datasheet: