2726188 Phoenix Contact, 2726188 Datasheet - Page 99

• Manufacturer Part Number: 2726188
• Description: INTERBUS Bus Coupler
• Manufacturer: Phoenix Contact

6452_en_02
9.3
The space required for cable routing depends on the number of cables to be installed and
must be left free on the left and/or right-hand side.
In order to minimize the parallel installation of signal and power supply lines, the cable duct
on the left can be used for the signal and bus lines, for example, and the duct on the right for
the power supply lines. This ensures that the parallel installation of these cable types is kept
to a minimum and limits interference on the signal lines.
For the distances of the upper and lower cable ducts or the cable routing to the devices,
please refer to the sections below.
9.3.1
9.3.1.1
Figure 9-3
If the distances are smaller, the minimum bending radius of the cables, easy handling
during installation, and a clear structure cannot be guaranteed.
Mounting distances
Mounting distances for Inline Modular IO terminals
Mounting distances for terminals in the 24 V DC, 120 V AC, and
230 V AC areas (excluding terminals with fiber optic connections)
Mounting distances for terminals in the 24 V DC, 120 V AC, and 230 V AC
areas
Mounting/removing devices
PHOENIX CONTACT
9-3