LCMXO1200E-4TN144I Lattice, LCMXO1200E-4TN144I Datasheet - Page 6

• Manufacturer Part Number: LCMXO1200E-4TN144I
• Description: CPLD - Complex Programmable Logic Devices 1200 LUTs 113 IO 1.2 V -4 Spd I
• Manufacturer: Lattice

Specifications of LCMXO1200E-4TN144I

• Rohs: yes
• Memory Type: SRAM
• Number Of Macrocells: 600
• Maximum Operating Frequency: 550 MHz
• Delay Time: 4.4 ns
• Number Of Programmable I/os: 113
• Operating Supply Voltage: 1.2 V
• Maximum Operating Temperature: + 100 C
• Minimum Operating Temperature: - 40 C
• Package / Case: TQFP-144
• Mounting Style: SMD/SMT
• Factory Pack Quantity: 300
• Supply Current: 18 mA
• Supply Voltage - Max: 1.26 V
• Supply Voltage - Min: 1.14 V

Lattice Semiconductor
Figure 2-3. Top View of the MachXO256 Device
PFU Blocks
The core of the MachXO devices consists of PFU and PFF blocks. The PFUs can be programmed to perform
Logic, Arithmetic, Distributed RAM, and Distributed ROM functions. PFF blocks can be programmed to perform
Logic, Arithmetic, and Distributed ROM functions. Except where necessary, the remainder of this data sheet will
use the term PFU to refer to both PFU and PFF blocks.
Each PFU block consists of four interconnected Slices, numbered 0-3 as shown in Figure 2-4. There are 53 inputs
and 25 outputs associated with each PFU block.
Figure 2-4. PFU Diagram
Slice
Each Slice contains two LUT4 lookup tables feeding two registers (programmed to be in FF or Latch mode), and
some associated logic that allows the LUTs to be combined to perform functions such as LUT5, LUT6, LUT7, and
LUT8. There is control logic to perform set/reset functions (programmable as synchronous/asynchronous), clock
select, chip-select, and wider RAM/ROM functions. Figure 2-5 shows an overview of the internal logic of the Slice.
The registers in the Slice can be configured for positive/negative and edge/level clocks.
FCIN
Latch
FF/
LUT4 &
CARRY
D
Programmable
Function
Units with
RAM (PFUs)
Slice 0
JTAG Port
Latch
FF/
CARRY
LUT4 &
D
Latch
FF/
LUT4 &
CARRY
D
Slice 1
Latch
FF/
CARRY
LUT4 &
D
Routing
Routing
2-3
From
To
Latch
FF/
CARRY
LUT4 &
D
Slice 2
Programmable Function
Units without RAM (PFFs)
PIOs Arranged
into sysIO Banks
Latch
FF/
CARRY
LUT4 &
D
MachXO Family Data Sheet
Latch
FF/
CARRY
LUT4 &
D
Slice 3
Latch
FF/
CARRY
LUT4 &
D
FCO
Architecture