TS4274CP18 RO Taiwan Semiconductor, TS4274CP18 RO Datasheet - Page 4
![no-image](/images/manufacturer_photos/0/6/647/taiwan_semiconductor_sml.jpg)
TS4274CP18 RO
Manufacturer Part Number
TS4274CP18 RO
Description
Low Dropout Controllers - LDO 500mA Ultra LDO Fixd Positive Voltage Reg
Manufacturer
Taiwan Semiconductor
Datasheet
1.TS4274CM25_RN.pdf
(10 pages)
Specifications of TS4274CP18 RO
Rohs
yes
Application Information (Continue)
Thermal Characteristics
A heatsink may be required depending on the maximum power dissipation and maximum ambient temperature of the
application. Under all possible operating conditions, the junction temperature must be within the range specified under
absolute maximum ratings. To determine if the heatsink is required, the power dissipated by the regulator, P
calculated.
The below formula shows the voltages and currents for calculating the P
IIN = IL / IG
P
Ex. P
Remark: I
The next parameter which must be calculated is the maximum allowable temperature rise.
TR(max) is calculated by the using to formula:
TR(max) = TJ(max) – TA(max)
Where: TJ(max) is the maximum allowable junction temperature, which is 125
is the maximum ambient temperature which will be encountered in the application.
Using the calculated values for TR(max) and PD, the maximum allowable value for the junction to ambient thermal
resistance, θ
IMPORTANT: if the maximum allowable value for is found to be ≥60
TO-263 package, ≥150
since the package alone will dissipate enough heat to satisfy these requirements. If the calculated value for θ
below these limits, a heatsink is required.
θ
D
JA
= (V
= TR(max) / PD
D
= 400mW + 36mW
= 436mW
= (3.3V-2.5V) * 0.5A + 3.3V * 11mA
IN
-V
V
I
V
G
L
OUT
IN
OUT
is output load current,
is ground current.
is input voltage
JA
) * I
is output voltage
, can now be found:
L
+ (V
IN
o
C/W for the TO-252 package, or ≥170
) * I
G
400mA Ultra Low Dropout Fixed Voltage Regulator
4/10
o
C /W for the SOT-223 package, no heatsink is needed
o
C /W for the TO-220 package, ≥80
D
in the regulator:
o
C for commercial grade parts. T
TS4274
Version: A07
o
C/W for the
D
must be
A
JA
(max)
falls