PCA9952TW,118 NXP Semiconductors, PCA9952TW,118 Datasheet - Page 39

• Manufacturer Part Number: PCA9952TW,118
• Description: LED Lighting Drivers 16-ch Fm+ I2C-bus 57 mA LED driver
• Manufacturer: NXP Semiconductors

Specifications of PCA9952TW,118

• Rohs: yes
• Input Voltage: 3 V to 5.5 V
• Operating Frequency: 31.25 kHz
• Maximum Supply Current: 15 mA
• Output Current: 62 mA
• Mounting Style: SMD/SMT
• Package / Case: HTSSOP-28
• Factory Pack Quantity: 2500

NXP Semiconductors
17. Handling information
18. Soldering of SMD packages
PCA9952_PCA9955
Product data sheet
18.1 Introduction to soldering
18.2 Wave and reflow soldering
18.3 Wave soldering
All input and output pins are protected against ElectroStatic Discharge (ESD) under
normal handling. When handling ensure that the appropriate precautions are taken as
described in JESD625-A or equivalent standards.
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note AN10365 “Surface mount reflow
soldering description”.
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for fine pitch SMDs. Reflow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reflow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature profile. Leaded packages,
packages with solder balls, and leadless packages are all reflow solderable.
Key characteristics in both wave and reflow soldering are:
Key characteristics in wave soldering are:
•
•
•
•
•
•
•
•
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Board specifications, including the board finish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus SnPb soldering
All information provided in this document is subject to legal disclaimers.
Rev. 6 — 22 April 2013
16-channel Fm+ I
2
C-bus 57 mA constant current LED driver
PCA9952; PCA9955
© NXP B.V. 2013. All rights reserved.
39 of 47