MCIMX6S4AVM08ABR Freescale Semiconductor, MCIMX6S4AVM08ABR Datasheet - Page 87

• Manufacturer Part Number: MCIMX6S4AVM08ABR
• Description: Processors - Application Specialized i.MX6 Solo rev 1.1
• Manufacturer: Freescale Semiconductor
• Type: Multimedia Applicationsr

Specifications of MCIMX6S4AVM08ABR

• Rohs: yes
• Core: ARM Cortex A9
• Processor Series: i.MX6
• Data Bus Width: 32 bit
• Maximum Clock Frequency: 800 MHz
• Data Ram Size: 16 KB
• Operating Supply Voltage: 1.175 V to 1.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: MAPBGA-624
• Interface Type: Parallel
• Memory Type: L1/L2 Cache, ROM, SRAM
• Minimum Operating Temperature: - 40 C
• Number Of Timers: 2

4.11.4.4 Bus Operation Condition for 3.3 V and 1.8 V Signaling
Signaling level of SD/eMMC4.3 and eMMC4.4 modes is 3.3 V. Signaling level of SDR104/SDR50 mode
is 1.8 V. The DC parameters for the NVCC_SD1, NVCC_SD2 and NVCC_SD3 supplies are identical to
those shown in
4.11.5
The following timing specs are defined at the chip I/O pin and must be translated appropriately to arrive
at timing specs/constraints for the physical interface.
4.11.5.1 ENET MII Mode Timing
This subsection describes MII receive, transmit, asynchronous inputs, and serial management signal
timings.
4.11.5.1.1
The receiver functions correctly up to an ENET_RX_CLK maximum frequency of 25 MHz + 1%. There
is no minimum frequency requirement. Additionally, the processor clock frequency must exceed twice the
ENET_RX_CLK frequency.
Freescale Semiconductor
1
Data window in SDR100 mode is variable.
SD7
SD8
ID
Ethernet Controller (ENET) AC Electrical Specifications
MII Receive Signal Timing (ENET_RX_DATA3,2,1,0, ENET_RX_EN,
ENET_RX_ER, and ENET_RX_CLK)
uSDHC Input Hold Time
Card Output Data Window
Table 24, "GPIO DC Parameters," on page
i.MX 6Solo/6DualLite Automotive and Infotainment Applications Processors, Rev. 1
Table 59. SDR50/SDR104 Interface Timing Specification (continued)
uSDHC Input/Card Outputs CMD, DAT in SDR104 (Reference to CLK)
Parameter
Symbols
t
ODW
t
IH
38.
0.5*t
Min
1.5
CLK
Max
—
—
1
Electrical Characteristics
Unit
ns
ns
87