ATXMEGA256A3-MU Atmel, ATXMEGA256A3-MU Datasheet - Page 12

• Manufacturer Part Number: ATXMEGA256A3-MU
• Description: 8-bit Microcontrollers - MCU 8/16 bit 1.6V-3.6V 256KB + 8KB
• Manufacturer: Atmel

Specifications of ATXMEGA256A3-MU

• Product Category: 8-bit Microcontrollers - MCU
• Rohs: yes
• Core: AVR
• Data Bus Width: 8 bit/16 bit
• Maximum Clock Frequency: 32 MHz
• Program Memory Size: 256 KB
• Data Ram Size: 16 KB
• On-chip Adc: Yes
• Package / Case: QFN EP
• Mounting Style: SMD/SMT
• A/d Bit Size: 12 bit
• A/d Channels Available: 8
• Data Rom Size: 4 KB
• Interface Type: I2C, SPI, USART
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Number Of Programmable I/os: 50
• Number Of Timers: 7
• Processor Series: ATXMega
• Program Memory Type: Flash
• Factory Pack Quantity: 260
• Supply Voltage - Max: 3.6 V
• Supply Voltage - Min: 1.6 V

7.4.1
7.4.2
7.4.3
8068T–AVR–12/10
I/O Memory
SRAM Data Memory
EEPROM Data Memory
All peripherals and modules are addressable through I/O memory locations in the data memory
space. All I/O memory locations can be accessed by the Load (LD/LDS/LDD) and Store
(ST/STS/STD) instructions, transferring data between the 32 general purpose registers in the
CPU and the I/O Memory.
The IN and OUT instructions can address I/O memory locations in the range 0x00 - 0x3F
directly.
I/O registers within the address range 0x00 - 0x1F are directly bit-accessible using the SBI and
CBI instructions. The value of single bits can be checked by using the SBIS and SBIC instruc-
tions on these registers.
The I/O memory address for all peripherals and modules in XMEGA A3 is shown in the
eral Module Address Map” on page
The XMEGA A3 devices have internal SRAM memory for data storage.
The XMEGA A3 devices have internal EEPROM memory for non-volatile data storage. It is
addressable either in a separate data space or it can be memory mapped into the normal data
memory space. The EEPROM memory supports both byte and page access.
56.
XMEGA A3
”Periph-
12