WIZ105SR-EVB WIZnet, WIZ105SR-EVB Datasheet - Page 13

• Manufacturer Part Number: WIZ105SR-EVB
• Description: Interface Development Tools EVALUATION BOARD FOR WIZ105SR
• Manufacturer: WIZnet
• Type: Serial to Ethernetr

Specifications of WIZ105SR-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ105SR
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 3.3 V
• Dimensions: 40 mm x 62 mm x 17 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Operating Supply Current: 250 mA

This chapter describes the configuration steps of WIZ105SR. The following listed items which
are included in your WIZ105SR-EVB package will be required in configuration.
The board connection steps are introduced in section 2.1.
2.1. Hardware Installation Procedure
WIZ105SR and the connection diagram is shown in Figure 3.
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
STEP 3: Use the RJ45 Ethernet cable in order to connect the module to an Ethernet
2. Getting Started
STEP 1: Connect the WIZ105SR module to the test board by using the 12pin cable.
STEP 2: Connect the 5V DC power line to the power jack of the test board.
STEP 4: Use the serial data cable to connect the test board to a serial device.
If you have prepared those things, the configuration of WIZ105SR can be getting started.
The following steps are required while to set up the configuration environment for
Power Adapter (included in the WIZ105SR-EVB package)
Serial and Ethernet Cable (included in the of WIZ105SR-EVB package)
A computer with Network Interface Card ( NIC) and/or one RS232 serial port
network.
Figure 2. WIZ105SR Configuration Environment Setting Diagram
Reset | PSEN | Factory Reset | HW Trigger
13