WIZ105SR-EVB WIZnet, WIZ105SR-EVB Datasheet - Page 34

• Manufacturer Part Number: WIZ105SR-EVB
• Description: Interface Development Tools EVALUATION BOARD FOR WIZ105SR
• Manufacturer: WIZnet
• Type: Serial to Ethernetr

Specifications of WIZ105SR-EVB

• Rohs: yes
• Product: Evaluation Boards
• Tool Is For Evaluation Of: WIZ105SR
• Interface Type: Ethernet, RS-232
• Operating Supply Voltage: 3.3 V
• Dimensions: 40 mm x 62 mm x 17 mm
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Operating Supply Current: 250 mA

In this chapter, we give an example that can be used to test the function of WIZ105SR.
The testing environment is as follows.
<Hardware>
STEP1.
① Make sure SW5(HW_TRIGGER) is set as ‘OFF’.
② Connect the PC and WIZ105SR Test board by using serial cable.
③ Connect the PC and WIZ105SR Test board by using Ethernet cable.
④ Power on the WIZ105SR Test Board.
STEP2.
① Modules are searched by click search button of the Configuration Tool.
② Select the board to be configured and change the value. To apply the changed value,
③ If changed value is successfully applied, the “Complete setting” message is displayed as
Hardwired Internet Connectivity Wizard (WIZnet, Inc.)
<Software>
6. Demonstration and Test
and Configuration Tool cannot be used)
click Setting button.
shown below figure.
(WIZ105SR Environment Setup)
PC having RS-232 serial port
WIZ105SR & WIZ105SR Test Board
Ethernet cable (Direct or Crossover) to connect PC and WIZ105SR
Serial cable to connect the COM port of PC and serial port of WIZ105SR
WIZ105SR Configuration tool
Hyper Terminal (or any other terminal program)
(If it is set as ON, the network is disabled,
34