DK-START-5AGXB3NES Altera Corporation, DK-START-5AGXB3NES Datasheet - Page 11

• Manufacturer Part Number: DK-START-5AGXB3NES
• Description: Programmable Logic IC Development Tools FPGA Starter Kit For 5AGXFB3H4F
• Manufacturer: Altera Corporation
• Type: FPGAr

Specifications of DK-START-5AGXB3NES

• Rohs: yes
• Product: Starter Kits
• Tool Is For Evaluation Of: 5AGXB3
• For Use With: 5AGXB3

Before You Begin
References
February 2013 Altera Corporation
Inspect the Boards
f
f
1
The remaining chapters in this user guide lead you through the following Arria V GX
starter board setup steps:
■
■
■
■
■
For complete information about the starter board, refer to the
Reference
Before using the kit or installing the software, check the kit contents and inspect the
boards to verify that you received all of the items listed in
If any of the items are missing, contact Altera before you proceed.
To inspect the boards, perform the following steps:
1. Place the board on an anti-static surface and inspect it to ensure that it has not been
2. Verify that all components are on the board and appear intact.
In typical applications with the Arria V GX starter board, a heat sink is not necessary.
However, under extreme conditions, the board might require additional cooling to
stay within operating temperature guidelines. The board has two holes near the
FPGA that accommodate many different heat sinks, including the Dynatron V31G.
You can perform power consumption and thermal modeling to determine whether
your application requires additional cooling.
For more information about power consumption and thermal modeling, refer to
AN 358: Thermal Management for
Use the following links to check the Altera website for other related information:
■
Inspecting the contents of the kit
Installing the design and kit software
Setting up, powering up, and verifying correct operation of the starter board
Configuring the Arria V GX FPGA
Running the Board Test System designs
damaged during shipment.
c
For the latest board design files and reference designs, refer to the
Starter Kit
Manual.
Without proper anti-static handling, you can damage the board.
page.
FPGAs.
2. Getting Started
“Kit Features” on page
Arria V GX Starter Board
Arria V GX
Arria V GX Starter Kit
User Guide
1–1.