KIT34708VMEVBE Freescale Semiconductor, KIT34708VMEVBE Datasheet - Page 34

• Manufacturer Part Number: KIT34708VMEVBE
• Description: Acceleration Sensor Development Tools 13x13 PWR MGMT AND UI
• Manufacturer: Freescale Semiconductor

Specifications of KIT34708VMEVBE

• Rohs: yes
• Tool Is For Evaluation Of: MC34708
• Sensing Axis: Single Axis
• Interface Type: I2C, SPI, USB
• Operating Voltage: 5 V
• Operating Current: 5 A
• Output Type: Analog, Digital

6.5
Freescale Semiconductor
•
•
•
•
The MC34708 GUI can control the ADC module for dedicated and touch screen
readings. In the ADC Settings area (see
For the touchscreen readings, a similar configuration can be made using the
Touchscreen Settings.
After the ADC is enabled and all settings have been configured into the MC34708 by
clicking the Send Command button, click the Read ADCs button, and the results
configured in each channel will be displayed.
As an example, follow these steps:
ADC Tab
1.
2.
3.
configure the conversion startup between conversions, and after final conversion
delays
assign the variables to be measured in different channels
the number of the ADC channels to use
and enable the continuous conversion and hold results.
Set the Start conversions button to ON.
Set the Conversion startup between conversions and after final conversion delays
to 200 μsec each.
Select the different parameters to be read on each channel from Channel
Selection 1 to 8 through the combo boxes, then set the Stop Channel as Channel
8.
KIT34708VMEVBE Evaluation
Figure 27. ADC Configuration Window
Figure
Board, Rev. 2.0
27), it is possible to:
Software
34