KIT34708VMEVBE Freescale Semiconductor, KIT34708VMEVBE Datasheet - Page 46

• Manufacturer Part Number: KIT34708VMEVBE
• Description: Acceleration Sensor Development Tools 13x13 PWR MGMT AND UI
• Manufacturer: Freescale Semiconductor

Specifications of KIT34708VMEVBE

• Rohs: yes
• Tool Is For Evaluation Of: MC34708
• Sensing Axis: Single Axis
• Interface Type: I2C, SPI, USB
• Operating Voltage: 5 V
• Operating Current: 5 A
• Output Type: Analog, Digital

Freescale Semiconductor
The following example shows a script that will read, and compare SW2, SW3, & SW5
voltages, and the RTC time. This is a more complex script with which the user can get
acquainted with the read value comparator:
2.
3.
4.
5.
6.
7.
8.
9.
10. In the Register list, select the PWM Control register, and with the Bytes buttons
11. Set a command delay of 100 ms. The command iterations and limits can be left
12. Click the Create Command button.
13. In the Register list, keep selecting the PWM Control register, and with the Bytes
14. Set a command delay of 100 ms. The command iterations and limits can be left
15. Click the Create Command button.
16. Select the Assign Name to Group option, and enter Loop on the group name
17. Set a group iterations value of 10.
18. Click the Create Group button.
19. Click the Save Script button and select a location and name for the script.
20. Load the script in the SCRIPTS tab using the Read Script File button.
21. Verify the connections of the KITUSBCOMDGLEVME and the KIT34708VMEVBE
22. Click the Start button of the SCRIPTS tab to run the script.
1.
2.
In the Register list, select the GPIO WDI Write High State command.
Set a command delay of 100 ms. The command iterations and limits can be left
with the default values.
Click the Create Command button.
In the Register list select the GPIO PWRON1 Write High State command.
Set a command delay of 100 ms. The command iterations and limits can be left
with the default values.
Click the Create Command button.
Select the Assign Name to Group option, and enter Turn on Sequence in the
group name text box.
Click the Create Group button.
set the following value: 00000000 00000000 00011111. This will turn on the green
LED D7 and turn off the green LED D8.
with the default values.
buttons set the following value: 00000001 11110000 00000000. This will turn off
the green LED D7 and turn on the green LED D8.
with the default values.
text box.
Go to the Board Validation tab and then click the Normal Mode button to select
Script Mode.
In the Register list, select the GPIO WDI Write High State command.
KIT34708VMEVBE Evaluation
Board, Rev. 2.0
Software
46