KIT34708VMEVBE Freescale Semiconductor, KIT34708VMEVBE Datasheet - Page 42

• Manufacturer Part Number: KIT34708VMEVBE
• Description: Acceleration Sensor Development Tools 13x13 PWR MGMT AND UI
• Manufacturer: Freescale Semiconductor

Specifications of KIT34708VMEVBE

• Rohs: yes
• Tool Is For Evaluation Of: MC34708
• Sensing Axis: Single Axis
• Interface Type: I2C, SPI, USB
• Operating Voltage: 5 V
• Operating Current: 5 A
• Output Type: Analog, Digital

6.11
Freescale Semiconductor
The BOARD VALIDATION and SCRIPTS tab control the overall functionality of the
device, instead of a specific block like other tabs.
BOARD VALIDATION and SCRIPTS Tabs
1.
2.
3.
4.
5.
The Register list as shown in
The register contents will be shown on the Bytes buttons when selected in the
register list. The user can manually modify the contents of the registers by clicking
on the buttons and sending the command by clicking the Send Command button.
The command to be sent will be displayed in the Command Assembled box.
A specific register can be read in the Auxiliary Read Bytes section using the
value from the Register list. The value of the register to be read will be shown in
the Bytes text box. This way, the user can (for example) check the result of an
ADC conversion on the ADC 2 register. They configure and trigger the ADC on the
rest of the ADC registers using the Register and Bytes sections. The main
purpose of the Auxiliary Read Bytes section is to read the contents from the
MC34708, but not write to the registers.
In the Gpio Outputs - Control Panel section, the CS, GLBRST, STANDBY, WDI,
and PWRON1 pins can be controlled by clicking their respective buttons.
Figure 35. Board Validation Configuration Window
KIT34708VMEVBE Evaluation
Figure 35
contains a list of all the MC34708 registers.
Board, Rev. 2.0
Software
42