SPZB32W1C2.1 STMicroelectronics, SPZB32W1C2.1 Datasheet - Page 16

• Manufacturer Part Number: SPZB32W1C2.1
• Description: Zigbee / 802.15.4 Modules Zigbee PRO Module STM32W Chipset
• Manufacturer: STMicroelectronics

Specifications of SPZB32W1C2.1

• Product Category: Zigbee / 802.15.4 Modules
• Frequency Band: 2.4 GHz
• Sensitivity: - 95 dBm
• Operating Supply Voltage: 3.3 V
• Supply Current Transmitting: 32 mA
• Supply Current Receiving: 28 mA
• Output Power: 6 dBm
• Antenna Connector Type: U.FL
• Maximum Operating Temperature: + 85 C
• Dimensions: 26.5 mm x 16.4 mm x 3.9 mm
• Interface Type: I2C, UART
• Minimum Operating Temperature: - 40 C

Product approvals
9.2
16/19
FCC labelling requirements
When integrating the SPZB32W1A2.1 / SPZB32W1C2.1 into the final product, it must be
ensured that the FCC labelling requirements, as specified below, are satisfied.
Based on the Public Notice from FCC, the product into which the ST transmitter module is
installed must display a label referring to the enclosed module.
The label should use wording such as “Contains Transmitter module FCC ID: S9NZB32C2
or “Contains FCC ID: S9NZB32C2, any similar wording that expressed the same meaning
may be used.
An example is:
Contains FCC ID: S9NZB32C2
European certification
The SPZB32W1A2.1 and the SPZB32W1C2.1 devices are CE certified:
Expert opinion N. 0365-ARAKO0071 released by IMQ refers to the following normatives:
●
●
●
Radio: EN300 328: V1.7.1: 2006-10
EMS: EN301 489-17 v 2.1.1: 2009
Safety: EN60950-1:2006 + A11:2009
Doc ID 018899 Rev 2
SPZB32W1x2.1