SDED7-256M-N9T SanDisk, SDED7-256M-N9T Datasheet - Page 33

• Manufacturer Part Number: SDED7-256M-N9T
• Description: IC MDOC H3 2GB 115-FBGA
• Manufacturer: SanDisk

Specifications of SDED7-256M-N9T

• Format - Memory: FLASH
• Memory Type: FLASH - Nand
• Memory Size: 2G (256M x 8)
• Interface: Parallel
• Voltage - Supply: 1.65 V ~ 1.95 V
• Operating Temperature: -25°C ~ 85°C
• Package / Case: 115-FBGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Speed: -
• Other names: 585-1211-2; SDED7-256M-N9T

Rev. 1.3
5.5
While in Deep Power-Down (DPD) mode, the quiescent power dissipation of the mDOC H3
device is further reduced by disabling internal high current consumers (e.g. voltage regulators,
input buffers, oscillator etc.)
Entering Deep Power-Down mode is done by either of the following:
Entering Deep Power-Down mode and then returning to the previous mode does not affect the
value of any register.
Exiting Deep Power-Down mode is done using one of the following methods:
33
Deep Power-Down Mode
• Writing to POWER_DN bit in the Power Mode Register.
• Activating a SW API to put the device immediately in DPD.
• Setting Auto DPD mode by SW. Depending on Auto DPD mode chosen the device
• Performing a read/write access from/to mDOC H3.
• RSTIN# assertion.
will either enter DPD upon device inactivity, or enter Standby mode upon device
inactivity and switch to DPD after a configurable period of inactivity.
mDOC H3 EFD Featuring Embedded TrueFFS Data Sheet
mDOC H3 Modes of Operation
92-DS-1205-10