MCZ33927EK Freescale Semiconductor, MCZ33927EK Datasheet - Page 23

• Manufacturer Part Number: MCZ33927EK
• Description: IC FET PRE-DRIVER 3PH 54-SOIC
• Manufacturer: Freescale Semiconductor

Specifications of MCZ33927EK

• Configuration: 3 Phase Bridge
• Input Type: Inverting and Non-Inverting
• Delay Time: 265ns
• Current - Peak: 600mA
• Number Of Configurations: 1
• Number Of Outputs: 3
• High Side Voltage - Max (bootstrap): 75V
• Voltage - Supply: 8 V ~ 40 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 54-SOIC (7.5mm Width) Exposed Pad, 54-eSOIC, 54-HSOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

VLS REGULATOR (VLS)
approximately 15V. This is an internally generated supply
from VPWR. It is the source for the low side gate drive
voltage, and also the high side bootstrap source. A low ESR
decoupling capacitor, capable of sourcing the pulsed drive
currents, must be connected between this pin and VSS or
PGND.
VPWR INPUT (VPWR)
flowing into this input recharges the bootstrap capacitors as
Analog Integrated Circuit Device Data
Freescale Semiconductor
VLS is the gate drive power supply regulated at
VPWR is the power supply input for VLS and VDD. Current
well as supplying power to the low-side gate drivers and the
VDD regulator. An internal regulator regulates the actual gate
voltages. This pin can be connected to system battery
voltage if power dissipation is not a concern.
EXPOSED PAD (EP)
heat out of the device. This pad may be connected electrically
to the substrate of the device.The device will perform as
specified with the Exposed Pad un-terminated (floating).
However, it is recommended that the Exposed Pad be
terminated to pin 29 (VSS) and the system ground.
The primary function of the Exposed Pad is to conduct
FUNCTIONAL DESCRIPTIONS
INTRODUCTION
33927
23