SDCFH-1024-388 SanDisk, SDCFH-1024-388 Datasheet - Page 76

• Manufacturer Part Number: SDCFH-1024-388
• Description: COMPACT FLASH 1GB ULTRA II
• Manufacturer: SanDisk

Specifications of SDCFH-1024-388

• Memory Size: 1GB
• Memory Type: CompactFLASH
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

02/07, Rev. 12.0
ATA Command Description
5.1.20
If the Sector Count Register contains a valid value and the block count is supported, the value
is loaded for all subsequent Read Multiple and Write Multiple commands and execution of
those commands is enabled. If a block count is not supported, an Aborted Command error is
posted, and Read Multiple and Write Multiple commands are disabled. If the Sector Count
Register contains 0 when the command is issued, Read and Write Multiple commands are
disabled. At power on, or after a hardware or (unless disabled by a Set Feature command)
software reset, the default mode is Read and Write Multiple disabled.
Table 5-28
Set Sleep Mode–99H, E6H
This command causes the card to set BSY, enter the Sleep mode, clear BSY and generate an
interrupt. Recovery from sleep mode is accomplished by simply issuing another command (a
reset is permitted but not required). Sleep mode is also entered when internal timers expire so
the host does not need to issue this command except when it wishes to enter Sleep mode
immediately. The default value for the read to sleep timer is 5 milliseconds. This time base (5
msec) is different from the ATA Specification.
Table 5-29
Command (7)
Command (7)
Sec Num (3)
Sec Num (3)
Cyl High (5)
Cyl High (5)
Cyl Low (4)
Cyl Low (4)
Sec Cnt (2)
Feature (1)
Sec Cnt (2)
Feature (1)
C/D/H (6)
C/D/H (6)
Bit
Bit
Set Multiple Mode
Set Multiple Mode
5-22
7
7
6
X
6
X
SanDisk CompactFlash Card OEM Product Manual
5
5
Drive
Drive
Sector Count
99H or E6H
4
4
C6H
X
X
X
X
X
X
X
X
X
3
3
© 2007 SanDisk Corporation
2
2
X
X
1
1
0
0