AFBR-5921ALZ Avago Technologies US Inc., AFBR-5921ALZ Datasheet - Page 4

• Manufacturer Part Number: AFBR-5921ALZ
• Description: TXRX SSF 3.3V 2/1GBS PTH 2X5
• Manufacturer: Avago Technologies US Inc.
• Series: -r

Specifications of AFBR-5921ALZ

• Data Rate: 2.125Gbps
• Wavelength: 850nm
• Applications: General Purpose
• Voltage - Supply: 2.97 V ~ 3.63 V
• Connector Type: LC Duplex
• Mounting Type: Through Hole
• Function: SFF, PTH, Low Voltage 3.3 V, Optical Transceiver for Fibre Channel
• Product: Transceiver
• Maximum Rise Time: 0.15 ns/0.2 ns
• Maximum Fall Time: 0.15 ns/0.2 ns
• Pulse Width Distortion: 0.063 ns (Max)/0.076 ns (Max)
• Operating Supply Voltage: 2.97 V to 3.63 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 10 C
• Package / Case: DIP With Connector
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Multimode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Electromagnetic Interference (EMI)
Most equipment designs utilizing these high-speed trans-
ceivers from Avago Technologies will be required to meet
the requirements of FCC in the United States, CENELEC
EN55022 (CISPR 22) in Europe and VCCI in Japan. The
metal housing and shielded design of the AFBR-5921ALZ
minimize the EMI challenge facing the host equipment
designer. These transceivers provide superior EMI perfor-
mance. This greatly assists the designer in the manage-
ment of the overall system EMI performance.
Eye Safety
These 850 nm VCSEL-based transceivers provide Class 1
eye safety by design. Avago Technologies has tested the
transceiver design for compliance with the requirements
listed in Table 1: Regulatory Compliance, under normal
operating conditions and under a single fault condition.
Reliability
These transceivers have an estimated failure rate of <100
FITS @ 50°C.
Table 1. Regulatory Compliance
4
Feather
Electrostatic Discharge
(ESD) to the Electrical Pins
Electrostatic Discharge
(ESD) to the Duplex LC
Receptacle
Electromagnetic Interference
(EMI)
Immunity
Eye Safety
Component Recognition
RoHS Compliance
Test Method
MIL-STD-889C Method 3015.4
Variation of IEC 61000-4-2
FCC Class B CENELEC
EN55022 Class B (CISPR 22A)
VCCI Class
Variation of IEC 61000-4-3
US FDA CDRH AEL Class 1
EN(IEC)60825-1,2
EN60950 Class 1
Underwriters Laboratories and UL
Canadian Standards Association
Joint Component Recognition for
Information Technology Equipment
including Electrical Business
Equipment.
Flammability
The AFBR-5921ALZ VCSEL transceiver housing is made
of metal and high strength, heat resistant, chemically
resistant, and UL 94V-0 flame retardant plastic.
Caution
There are no user serviceable parts nor is any mainte-
nance required for the AFBR-5921ALZ. All adjustments are
made at the factory before shipment to our customers.
Tampering with or modifying the performance of the
AFBR-5921ALZ will result in voided product warranty. It
may also result in improper operation of the AFBR-5921ALZ
circuitry, and possible overstress of the laser source. Device
degradation or product failure may result. Connection
of the AFBR-5921ALZ to a non-approved optical source,
operating above the recommended absolute maximum
conditions or operating the AFBR-5921ALZ in a manner
inconsistent with its design and function may result in
hazardous radiation exposure and may be considered an
act of modifying or manufacturing a laser product. The
person(s) performing such an act is required by law to
re-certify and re-identify the laser product under the
provisions of U.S. 21 CFR (Subchapter J) and the TUV.
Performance
Class 2 (> 2000V)
Typically withstand at least 25kV without damage when
the duplex LC connector receptacle is contaced by a
Human Body Model probe.
System margins are dependent on customer board and
chassis design.
Typically shows a negligible effect from a 10 V/m field
swept from 80 to 1000 MHz applied to the transceiver
without a chassis enclosure.
CDRH file #TBDTUV file #TBD
UL file #TBD
Less than 1000 ppm of cadminm, lead, mercury, hexavalent
chromium, polybrominated biphenyls and polybrominated
biphenyl