DLP-2232M-G DLP Design Inc, DLP-2232M-G Datasheet - Page 32

• Manufacturer Part Number: DLP-2232M-G
• Description: MODULE USB ADAPTER FOR FT2232D
• Manufacturer: DLP Design Inc

Specifications of DLP-2232M-G

• Main Purpose: Interface, USB 2.0 to UART (RS232) Bridge
• Embedded: No
• Utilized Ic / Part: FT2232D
• Primary Attributes: Full Speed USB to High-Speed UART
• Secondary Attributes: Royalty-Free Drivers, 2K EEPROM
• Interface Type: USB
• Data Bus Width: 8 bit
• Operating Supply Voltage: 4.35 V to 5.25 V
• Product: Interface Modules
• For Use With/related Products: FT2232D
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 813-1000

8) Data bit 6
9) Data bit 7
10) Source/Destination (‘0’ indicates channel A; ‘1’ indicates channel B)
Enabling
Fast serial mode is enabled via EEPROM option bits. The device can be reset by setting
an enable value of $10 to the Set Bit Bang Mode command. While this bit is set, the
device is held reset.
Set_USB_Device_BitMode($00,$10) ; to reset it
Set_USB_Device_BitMode($00,$00) ; to enable it
Figure 36 - Fast Opto-Isolated Serial Interface Example
10.0 Disclaimer
© DLP Design, Inc., 2002 / 2009
Neither the whole nor any part of the information contained in, or the product described
in this manual, may be adapted or reproduced in any material or electronic form without
the prior written consent of the copyright holder.
This product and its documentation are supplied on an as-is basis and no warranty as to
their suitability for any particular purpose is either made or implied. DLP Design, Inc.
will not accept any claim for damages howsoever arising as a result of use or failure of
this product. Your statutory rights are not affected. This product or any variant of it is not
intended for use in any medical appliance, device or system in which the failure of the
product might reasonably be expected to result in personal injury.
This document provides information that may be subject to change without notice.
11.0 Contact Information
DLP Design, Inc.
1605 Roma Lane
Allen, TX 75013
Phone: [phone]
Fax: [phone]
E-Mail ( Sales ) :
[e-mail]
E-Mail ( Support ) :
[e-mail]
Web Site URL :
http://www.dlpdesign.com
Rev 1.6 (May 2009)
32
DLP-2232M-G DLP Design, Inc.