101-1218 Rabbit Semiconductor, 101-1218 Datasheet - Page 15

• Manufacturer Part Number: 101-1218
• Description: KIT APPLCTN RABBITCORE RCM4010
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore®r

Specifications of 101-1218

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: RCM4010
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: Rabbit 4000
• Interface Type: Ethernet
• Operating Supply Voltage: 12 V
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1156

2.2.2 Step 2 — Attach Module to Prototyping Board
Turn the RCM4000/RCM4010/RCM4050 module so that the mounting holes line up with
the corresponding holes on the Prototyping Board. Insert the metal standoffs as shown in
Figure 3, secure them from the bottom using the 4-40 screws and washers, then insert the
module’s header J3 on the bottom side into socket RCM1 on the Prototyping Board. (You
may use plastic standoffs instead of the metal standoffs and screws.)
Press the module’s pins gently into the Prototyping Board socket—press down in the area
above the header pins. For additional integrity, you may secure the RCM4000/RCM4010/
RCM4050 to the standoffs from the top using the remaining two screws and washers.
User’s Manual
NOTE: It is important that you line up the pins on header J3 of the module exactly with
socket RCM1 on the Prototyping Board. The header pins may become bent or damaged
if the pin alignment is offset, and the module will not work. Permanent electrical dam-
age to the module may also result if a misaligned module is powered up.
Figure 3. Install the Module on the Prototyping Board
9