101-1218 Rabbit Semiconductor, 101-1218 Datasheet - Page 75

• Manufacturer Part Number: 101-1218
• Description: KIT APPLCTN RABBITCORE RCM4010
• Manufacturer: Rabbit Semiconductor
• Series: RabbitCore®r

Specifications of 101-1218

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: RCM4010
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: Rabbit 4000
• Interface Type: Ethernet
• Operating Supply Voltage: 12 V
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1156

6.1 TCP/IP Connections
Programming and development can be done with the RCM4000 without connecting the
Ethernet port to a network. However, if you will be running the sample programs that use
the Ethernet capability or will be doing Ethernet-enabled development, you should connect
the RCM4000 module’s Ethernet port at this time.
Before proceeding you will need to have the following items.
• If you don’t have Ethernet access, you will need at least a 10Base-T Ethernet card
• Two RJ-45 straight-through Ethernet cables and a hub, or an RJ-45 crossover Ethernet
Figure 14 shows how to identify the two Ethernet cables based on the wires in the trans-
parent RJ-45 connectors.
Ethernet cables and a 10Base-T Ethernet hub are available from Rabbit in a TCP/IP tool
kit. More information is available at www.rabbit.com.
Now you should be able to make your connections.
User’s Manual
(available from your favorite computer supplier) installed in a PC.
cable.
Figure 14. How to Identify Straight-Through and Crossover Ethernet Cables
6. U
SING THE
TCP/IP F
EATURES
69