M3A-0033 Renesas Electronics America, M3A-0033 Datasheet - Page 12

• Manufacturer Part Number: M3A-0033
• Description: DEV EVALUATION BOARD FOR M66291G
• Manufacturer: Renesas Electronics America

Specifications of M3A-0033

• Main Purpose: USB Controller
• Embedded: *
• Utilized Ic / Part: M66291
• Primary Attributes: *
• Secondary Attributes: *
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Chapter 5. Software setup
5.1 Operation Environment
5.2 Installing KD308
M66291GP Evaluation Board
Each software attached to this product operates on PC for development shown in Table 5-1.
Table 5-1 PC Operation Environment for Development
Note1: KNC308WA operates on DOS prompt of Windows.
Note2: In KNC308WA and KD308, Special characters (space, etc.) cannot be included in a file name.
PC
OS
CPU
Memory
5.2.1 Installation Procedure
5.2.2 Starting Up KD308
Follow the procedure described below to install KD308.
(1) Run ' setup.exe ' in ENGLISH\KD308\SETUP on CD-ROM.
(2) Display the install's window , and install under the window.
Before you can start up KD308, you must first set up hardware. For this setup, refer to Chapter 4.
To start up KD308, click [start] - [program] - [MITSUBISHI-TOOL] - [KD308] for Windows 98.
When you call up KD308, an Init dialog box (Figure 5.1) appears. Use this dialog box to set the operating
environment required for start-up of KD308.
The Init dialog box is detailed in KD308's manual. Here, set the following item to ensure that KD308 starts up
normally.
When you have finished setting the above, click on the <OK> button in the Init dialog box. If communication is
performed normally, KD308 starts up automatically and a window like the one shown in Figure 5-2 appears.
A network drive name neither is used, please assign the network drive name to a internal drive name
when you use.
IBM PC/AT and its compatible machine
Windows98,Windows98SE
Pentium166MHz or better (recommendation)
64Mbytes or more (recommendation)
Figure 5-1 Init Window
- 8 -
M3A-0033