DEMOBOARD PROFET Infineon Technologies, DEMOBOARD PROFET Datasheet - Page 23

• Manufacturer Part Number: DEMOBOARD PROFET
• Description: BOARD DEMO PROFET V2.0BTS
• Manufacturer: Infineon Technologies

Specifications of DEMOBOARD PROFET

• Main Purpose: Power Management, High Side Driver (Internal FET)
• Embedded: No
• Utilized Ic / Part: BTS5230, BTS5234, BTS5241, BTS6143
• Primary Attributes: 4 High Side Switch Boards @ 10A, 9.5A, 5.5A, 1.8A, 5 ~ 24V
• Secondary Attributes: Overvoltage, Short-Circuit & Thermal Protection
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: DEMOBOARDPROFETIN

5. after download has been finished, the progress bar is replaced by the download button
6. when destination EEPROM was chosen, set jumper in position normal and cycle
The software list box shows all files with extension “.hex”. It is filled at program startup
only. When there is a file with the same filename but extension “.txt”, a description is
shown as soon as the entry is selected in the software list box.
3.2
The DTR handshake line is used to reset the micro controller. The button “Connect”
provides a mechanism to change the level of that handshake line.
• Button shows “Connect”: The level at DTR is -12 V or high impedance
• Button shows “Disconnect”: The level at DTR is +12 V, system is running
During Download, the DTR line is handled automatically. It is set to -12 V for about
200 ms. After that, the level is raised to +12 V and the system waits about 200 ms again
to ensure that the hardware did setup all other levels. Now download begins. After
download has been finished, the loader changes to connect state automatically.
When automatic reset handling should be disabled, resistor R12 has to be removed.
3.3
To enable utilization of the C868 loader with many hardware platforms, the baud rate and
the communication port can be selected with the setup dialog.
Figure 7
1)
Tool Description
again. The loader keeps the target system connected.
button “Disconnect“, “Connect”.
This depends on the hardware built into your computer
Using DTR Line as Reset Signal
Setup Dialog
Setup Dialog
23
PROFET Demo Kit
Download Software
Tool Description
V 2.0, 2004-04-02
1)