MCP651EV-VOS Microchip Technology, MCP651EV-VOS Datasheet - Page 27

• Manufacturer Part Number: MCP651EV-VOS
• Description: BOARD EVAL OP AMP MCP651
• Manufacturer: Microchip Technology
• Series: mCal Technologyr

Specifications of MCP651EV-VOS

• Channels Per Ic: 1 - Single
• Amplifier Type: General Purpose
• Output Type: Single-Ended, Rail-to-Rail
• Slew Rate: 30 V/µs
• Current - Output / Channel: 100mA
• Operating Temperature: -40°C ~ 125°C
• Current - Supply (main Ic): 6mA
• Voltage - Supply, Single/dual (±): 2.5 V ~ 5.5 V
• Board Type: Fully Populated
• Utilized Ic / Part: MCP651
• Processor To Be Evaluated: MCP651
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Operating Supply Voltage: 2.5 V to 5.5 V
• Tool Type: Evaluation Board
• Core Architecture: PIC
• Cpu Core: PIC
• Data Bus Width: 8 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

© 2009 Microchip Technology Inc.
Figure 3-4 shows a SOIC-8 op amp soldered onto the 8-Pin SOIC/MSOP/TSSOP/DIP
Evaluation Board available from Microchip Technology Inc. The two interconnect strips
on the bottom are soldered into the through holes for the DIP-8 socket. Figure 3-5
shows this board plugged into the MCP651 Input Offset Evaluation Board.
FIGURE 3-4:
Adaptor PCB.
FIGURE 3-5:
Board.
Note 1:
Front
View
2:
Build the adaptor board in the following sequence. Insert the interconnect
headers into the DIP-8 socket on the MCP651 Input Offset Evaluation
Board. Place the SOIC8EV board on the top of the interconnect headers,
while maintaining the correct pin orientation. Solder the headers to the
top board. Clip the pins flush with the top surface of the SOIC8EV board,
then solder the (SOIC-8) op amp on the top.
See Table B-4 for part numbers of this board and its components.
Op Amp in SOIC-8 Package and Connector Headers Soldered to
Adaptor Board Connected to the MCP651 Input Offset Evaluation
DS51834A-page 23
Back
View