C8051F330-TB Silicon Laboratories Inc, C8051F330-TB Datasheet - Page 25

• Manufacturer Part Number: C8051F330-TB
• Description: BOARD PROTOTYPING W/C8051F330
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F330-TB

• Contents: Board
• Processor To Be Evaluated: C8051F33x
• Interface Type: RS-232, UART
• Operating Supply Voltage: 7 V to 15 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F330
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

1.6.
An on-chip Programmable Counter/Timer Array (PCA) is included in addition to the four 16-bit general pur-
pose counter/timers. The PCA consists of a dedicated 16-bit counter/timer time base with three program-
mable capture/compare modules. The PCA clock is derived from one of six sources: the system clock
divided by 12, the system clock divided by 4, Timer 0 overflows, an External Clock Input (ECI), the system
clock, or the external oscillator clock source divided by 8. The external clock source selection is useful for
real-time clock functionality, where the PCA is clocked by an external source while the internal oscillator
drives the system clock.
Each capture/compare module can be configured to operate in one of six modes: Edge-Triggered Capture,
Software Timer, High Speed Output, 8- or 16-bit Pulse Width Modulator, or Frequency Output. Additionally,
Capture/Compare Module 2 offers watchdog timer (WDT) capabilities. Following a system reset, Module 2
is configured and enabled in WDT mode. The PCA Capture/Compare Module I/O and External Clock Input
may be routed to Port I/O via the Digital Crossbar.
Programmable Counter Array
Figure 1.13. PCA Block Diagram
Capture/Compare
Module 0
SYSCLK/12
SYSCLK/4
Timer 0 Overflow
SYSCLK
External Clock/8
ECI
Crossbar
Port I/O
Rev. 1.7
Capture/Compare
Module 1
CLOCK
MUX
PCA
C8051F330/1/2/3/4/5
16-Bit Counter/Timer
Capture/Compare
Module 2 / WDT
27