C8051F330-TB Silicon Laboratories Inc, C8051F330-TB Datasheet - Page 73

• Manufacturer Part Number: C8051F330-TB
• Description: BOARD PROTOTYPING W/C8051F330
• Manufacturer: Silicon Laboratories Inc
• Type: MCUr

Specifications of C8051F330-TB

• Contents: Board
• Processor To Be Evaluated: C8051F33x
• Interface Type: RS-232, UART
• Operating Supply Voltage: 7 V to 15 V
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: C8051F330
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

C8051F330/1/2/3/4/5
9.2.
The memory organization of the CIP-51 System Controller is similar to that of a standard 8051. There are
two separate memory spaces: program memory and data memory. Program and data memory share the
same address space but are accessed via different instruction types. The CIP-51 memory organization is
shown in Figure 9.2
76
Notes on Registers, Operands and Addressing Modes:
Rn - Register R0–R7 of the currently selected register bank.
@Ri - Data RAM location addressed indirectly through R0 or R1.
rel - 8-bit, signed (two’s complement) offset relative to the first byte of the following instruction. Used by
SJMP and all conditional jumps.
direct - 8-bit internal data location’s address. This could be a direct-access Data RAM location
(0x00–0x7F) or an SFR (0x80–0xFF).
#data - 8-bit constant
#data16 - 16-bit constant
bit - Direct-accessed bit in Data RAM or SFR
addr11 - 11-bit destination address used by ACALL and AJMP. The destination must be within the same
2 kB page of program memory as the first byte of the following instruction.
addr16 - 16-bit destination address used by LCALL and LJMP. The destination may be anywhere within
the 8 kB program memory space.
There is one unused opcode (0xA5) that performs the same function as NOP.
All mnemonics copyrighted © Intel Corporation 1980.
Memory Organization
Rev. 1.7