M30290T2-CPE-HP Renesas Electronics America, M30290T2-CPE-HP Datasheet - Page 29

• Manufacturer Part Number: M30290T2-CPE-HP
• Description: EMULATOR COMPACT FOR M16C/TINY
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30290T2-CPE-HP

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/Tiny
• For Use With: M30290T2-CPE - EMULATOR COMPACT M16C/26A/28/29
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M30290T2-CPE User’s Manual
Figure 2.9 Target status LEDs display when the emulator starts up normally (when user system connected)
REJ10J0494-0200 Rev.2.00 July 16, 2005
Note on the Target Status CLOCK LED:
If the LED is not turned on, check the following.
(1) After powering on the emulator (before starting up the emulator debugger):
(2) After the emulator debugger is started up (after the Init dialog box settings are completed):
Make sure that the oscillator circuit board is properly installed in the emulator and it is oscillating normally.
Make sure that the oscillator selected in the Init dialog box is oscillating normally.
If the POWER LED does not light, shut off the
system and check the setting of the jumper
switches and if the power is properly
supplied to the user system.
When the user system connected :
: ON
: OFF
IMPORTANT
POWER
CLOCK
RESET
RUN
LED 3
LED 4
LED 5
LED 6
Page 27 of 86
2. Setup