M30290T2-CPE-HP Renesas Electronics America, M30290T2-CPE-HP Datasheet - Page 9

• Manufacturer Part Number: M30290T2-CPE-HP
• Description: EMULATOR COMPACT FOR M16C/TINY
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M30290T2-CPE-HP

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M16C/Tiny
• For Use With: M30290T2-CPE - EMULATOR COMPACT M16C/26A/28/29
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

M30290T2-CPE User’s Manual
REJ10J0494-0200 Rev.2.00 July 16, 2005
Warnings for AC Power Supply:
Warnings to Be Taken for This Product:
Warning for Installation:
Warning for Use Environment:
This equipment is to be used in an environment with a maximum ambient temperature of 35°C. Care should be
taken that this temperature is not exceeded.
If the attached AC power cable does not fit the receptacle, do not alter the AC power cable and do not plug it
forcibly. Failure to comply may cause electric shock and/or fire.
Use an AC power cable which complies with the safety standard of the country.
Do not touch the plug of the AC power cable when your hands are wet. This may cause electric shock.
This product is connected signal ground with frame ground. If your developing product is transformless (not
having isolation transformer of AC power), this may cause electric shock. Also, this may give an unrepairable
damage to this product and your developing one.
While developing, connect AC power of the product to commercial power through isolation transformer in
order to avoid these dangers.
If other equipment is connected to the same branch circuit, care should be taken not to overload the circuit.
Use the power supply which complies with CE marking requirements.
When installing this equipment, insure that a reliable ground connection is maintained.
If you smell a strange odor, hear an unusual sound, or see smoke coming from this product, then disconnect
power immediately by unplugging the AC power cable from the outlet.
Do not use this as it is because of the danger of electric shock and/or fire. In this case, contact your local
distributor.
Before setting up this emulator and connecting it to other devices, turn off power or remove a power cable to
prevent injury or product damage.
Do not disassemble or modify this product. Personal injury due to electric shock may occur if this product is
disassembled and modified. Disassembling and modifying the product will void your warranty.
Make sure nothing falls into the cooling fan on the top panel, especially liquids, metal objects, or anything
combustible.
Do not set this product in water or areas of high humidity. Make sure that the product does not get wet. Spilling
water or some other liquid into the product may cause unrepairable damage.
WARNING
Precautions for Safety
Page 7 of 86