M306K9T2-CPE Renesas Electronics America, M306K9T2-CPE Datasheet - Page 21
![no-image](/images/manufacturer_photos/0/5/560/renesas_electronics_america_sml.jpg)
M306K9T2-CPE
Manufacturer Part Number
M306K9T2-CPE
Description
M-SUPPORT TOOL
Manufacturer
Renesas Electronics America
Type
In Circuit Debuggerr
Specifications of M306K9T2-CPE
Contents
Compact Emulator, IDE, Assembler and Linker
For Use With/related Products
M306K9
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
2.2 Starting Up the Emulator
The procedure for starting up the emulator is shown in Figure 2.3. For details, refer to each section
hereafter. And, when the emulator does not start up normally, refer to "Chapter 5. Troubleshooting"
(page 43).
Figure 2.3 Procedure for starting up the emulator
Connect the power supply for the emulator.
Set the MCU power supply source
Specify the operating environment.
Set the function selection switches
Connect the USB interface cable.
Check the LEDs of the emulator.
Start up the emulator debugger.
using the emulator debugger.
Connect the target system.
selection jumper (JP1).
(SW1, SW2 and SW3).
Turn on the emulator.
Debug the program
( 19 / 56 )
Set the switch according to the connection to the
target system.
- When not connected: INT
- When connected: EXT
Set the switch according to the usage.
- SW1: P87/XCIN
- SW2: P86/OPEN
- SW3: XOUT/OPEN
Connect the USB interface cable to the USB interface
connector (J2) of the emulator and the USB port of
the host machine.
Connect the power supply to the power connector
(J1). Emulator power should be 5.0 V ±5%, 2 A.
Connect the target system to the emulator when
necessary.
Recheck the connection, and turn on the emulator.
When the target system is connected, turn on the
target system too. Turn them on as simultaneously
as possible.
Check that the system status LEDs and "POWER"
and "CLOCK" of the target status LEDs light. When
the target system is not connected "POWER" does
not light.
Start up emulator debugger PD30M.
In the INIT dialog box of emulator debugger PD30M,
specify the following, and press the OK button.
- MCU file: M306K9.mcu
Emulator debugger PD30M offers various debugging
functions. For details on PD30M, refer to the online
manual of PD30M.