M306K9T2-CPE Renesas Electronics America, M306K9T2-CPE Datasheet - Page 24

• Manufacturer Part Number: M306K9T2-CPE
• Description: M-SUPPORT TOOL
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M306K9T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M306K9
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.4 Connecting the Emulator System
How to connect the emulator system is described hereafter.
Figure 2.5 Connecting the emulator system
(1) Connecting the USB Interface Cable
Connect the USB interface cable (included) to the USB interface connector (J2) and the USB port
of the host machine (see Figure 2.5).
(2) Connecting the Power Cable
Connect the power supply for the emulator to the power connector (J1). The specification of the
power supply for the emulator is listed in Table 2.6.
Table 2.6 Specification of power supply of the emulator
Figures 2.6 and 2.7 show the specifications of the power connector and an applicable plug,
respectively.
Figure 2.6 Specification of the power connector
Power supply voltage
Note on Connecting the Power Supply of the Emulator:
Electrode (+)
• Be careful about the polarity of the power supply. Connecting to the wrong electrode
• The power cable included in this product package is colored red (+) and black (-).
• Do not apply a voltage exceeding the specified voltage of the product (5.0 V ±5%),
could destroy internal circuits.
because it may cause burn injuries and the failure of internal circuits.
Connect the power cable to connector J1.
LED1
POWER
SAFE
POWER
CLOCK
RESET
RUN
LED3
LED6
LED2
COMPACT EMULATOR
DC 5.0 V ±5%, 2 A
To emulator power supply
Electrode (-)
( 22 / 56 )
CAUTION
MADE
J1
J2
b
Figure 2.7 Specification of an applicable plug
To host machine
Connect the USB interface cable to connector J2.
SW1
ø1.7 mm (Inside diameter)
ø4.75 mm