M306K9T2-CPE Renesas Electronics America, M306K9T2-CPE Datasheet - Page 34

• Manufacturer Part Number: M306K9T2-CPE
• Description: M-SUPPORT TOOL
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M306K9T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M306K9
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

(2) Using the Oscillator Circuit on the Target System
To operate the compact emulator with the oscillator circuit on the target system, construct the
oscillator circuit as shown in Figure 3.1 in the target system and input the oscillator output at 50%
duty (within the operating range of the evaluation MCU) into pin X
It is same for sub-clock oscillator (X
Figure 3.1 External oscillator circuit
Make note of the fact that in the oscillator circuit shown in Figure 3.2 where a resonator is connected
between pins X
the evaluation MCU and the target system. It is same for sub-clock oscillator circuits (X
X
Figure 3.2 Circuit in which oscillation does not occur (same for X
COUT
Notes on Operating an Oscillator Circuit on the Target System:
).
• To operate this product with an external clock, construct the oscillator circuit as
• Make note that in the oscillator circuit shown in Figure 3.2 where a resonator is
IN
shown in Figure 3.6 in the target system and input the oscillator output at 50% duty
(within the operating range of the evaluation MCU) into pin X
should be open.
connected between pins X
board and other devices are used between the evaluation MCU and the target system.
It is same for sub-clock oscillator circuits (X
and X
OUT
, oscillation does not occur because an emulation circuit is used between
( 32 / 56 )
IMPORTANT
CIN
and X
IN
and X
COUT
OUT
).
, oscillation does not occur because a converter
CIN
and X
IN
CIN
. And pin X
-X
COUT
COUT
).
)
OUT
IN
should be open.
. And pin X
CIN
and
OUT