M306K9T2-CPE Renesas Electronics America, M306K9T2-CPE Datasheet - Page 28

• Manufacturer Part Number: M306K9T2-CPE
• Description: M-SUPPORT TOOL
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of M306K9T2-CPE

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: M306K9
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Figure 2.10 Positions of system status LEDs and target status LEDs
(1) System status LEDs
(2) Target status LEDs
Figure 2.12 LED display when the emulator starts up normally (target connected)
(3) LED Display When the Emulator Starts Up Normally
After the emulator starts up, check the status of the LEDs to see whether the emulator operation is
enabled or not.
Figure 2.11 LED display when the emulator starts up normally (target not connected)
Check that the LED1 of the system status LEDs is lit immediately after the power is activated.
If it is not lit, shut off the emulator and check the power supply for the emulator is properly
connected.
Target status LEDs light as shown in Figure 2.11 when the target system is not connected and as
shown in Figure 2.12 when a target system is connected. For about 5 seconds after power is
turned on, all the target status LEDs light. After that, make sure the target status LEDs light
up normally.
If the target status LEDs do not light as shown in Figure 2.11 or Figure 2.12, see "5.1
Troubleshooting Until the Emulator Starts Up" (page 44).
When the target system connected:
If the POWER LED does not light, shut off
the system and check the setting of the
jumper switches and if the power is properly
supplied to the target system.
When the target system NOT connected:
The POWER LED does not light.
System status LED
Target status LED
: OFF
: ON
: OFF
: ON
LED1
POWER
SAFE
( 26 / 56 )
POWER
CLOCK
RESET
RUN
LED2
LED3
LED6
COMPACT EMULATOR
POWER
POWER
CLOCK
RESET
CLOCK
RESET
RUN
RUN
MADE
J1
J2
LED3
LED4
LED5
LED6
LED3
LED4
LED5
LED6
SW1