R0E5212DACPE00 Renesas Electronics America, R0E5212DACPE00 Datasheet - Page 30

• Manufacturer Part Number: R0E5212DACPE00
• Description: EMULATOR DEV COMPACT R8C-2C/D
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of R0E5212DACPE00

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: R8C/2C, R8C/2D
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

R0E521000CPE00 User’s Manual
2. Setup
(2) Using an Oscillator Circuit on the User System
To operate this product with an external clock, construct an oscillator circuit as shown in Figure 2.7 in the user system and
input the oscillator output at 50% duty (within the operating range of the evaluation MCU) into pin X
. And pin X
should
IN
OUT
be open. Choose "External" in the emulator debugger to use this clock.
Figure 2.7 External oscillator circuit
Make note that in the oscillator circuit shown in Figure 2.8 where a resonator is connected between pins X
and X
,
IN
OUT
oscillation does not occur because a converter board and other devices are used between the evaluation MCU and the user
system. It is same for sub-clock oscillator circuits (X
and X
).
CIN
COUT
Evaluation MCU
XIN
XOUT
Figure 2.8 Circuit which is not be usable with the emulator
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 28 of 92