R0E5212DACPE00 Renesas Electronics America, R0E5212DACPE00 Datasheet - Page 32

• Manufacturer Part Number: R0E5212DACPE00
• Description: EMULATOR DEV COMPACT R8C-2C/D
• Manufacturer: Renesas Electronics America
• Type: In Circuit Debuggerr

Specifications of R0E5212DACPE00

• Contents: Compact Emulator, IDE, Assembler and Linker
• For Use With/related Products: R8C/2C, R8C/2D
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

R0E521000CPE00 User’s Manual
2.4 Attaching the Ferrite Core
Attach the ferrite core included with this product close to the DC plug of the power cable. Without the ferrite core it may cause
interference.
The power cable should be wound around the ferrite core as shown in Figure 2.10, and close the ferrite core until it clicks.
Figure 2.10 Attaching the ferrite core
2.5 Connecting the Power Supply for the Emulator
Connect the power supply for the emulator to the power connector (J1). The specification of the power supply for the emulator
is listed in Table 2.5.
Table 2.5 Specification of power supply of the emulator
Figures 2.11 and 2.12 show the specifications of the power connector (J1) and an applicable plug, respectively.
Figure 2.11 Power connector specifications
REJ10J0845-0600 Rev.6.00 Aug. 20, 2009
Page 30 of 92
Notes on Connecting a Power Supply of the Emulator:
Power supply voltage
Electrode (+)
The power cable included in this product package is colored red (+) and black (-).
Be careful about the polarity of the power supply. Connecting to the wrong electrode could destroy internal
circuits.
Do not apply a voltage exceeding the specified voltage of the product (5.0 V ±5%), because it may cause burn
injuries and the failure of internal circuits.
Use the power supply which complies with CE marking requirements.
DC 5.0 V±5％/2 A
Electrode (-)
Figure 2.12 Applicable plug specifications
CAUTION
φ 1.7mm(Inside diameter)
φ 4.75mm
2. Setup